Professor Hassan Ghadbeigi

BSc(hons), MSc(hons), PhD, FHEA, CEng MIMechE

School of Mechanical, Aerospace and Civil Engineering

Chair of Structural Integrity in Manufacturing

Study Abroad Tutor

h.ghadbeigi@sheffield.ac.uk
+44 114 22 27748

D214, Central Wing, Sir Frederick Mappin Building

Full contact details

Professor Hassan Ghadbeigi
School of Mechanical, Aerospace and Civil Engineering
D214, Central Wing
Sir Frederick Mappin Building
Mappin Street
Sheffield
S1 3JD

Profile

Professor Ghadbeigi obtained his BSc in Manufacturing Engineering and MSc in Mechanical Engineering in Iran, Sharif University of Tech, before joining The University of Sheffield in 2006 where he obtained his PhD in Mechanical Engineering and then became a member of academic staff in 2013.

While working on his PhD project, he was also a member of IMMPETUS as Research Assistant (2006-2010) and was involved in projects on modelling and characterisation of material deformation during thermo-mechanical processing.

Prof Ghadbeigi's research interest covers experimental investigation of materials deformation and failure mechanisms during thermo-mechanical loads and manufacturing processes, using experimental methods such as full field deformation characterisation and bespoke experimental design, as well as developing predictive analytical and numerical tools to simulate functional performance of materials and components.

His main research interest covers the effect of manufacturing processes on structural integrity and functional performance of components. His research was supported by collaboratives across the automotive, aerospace and energy sectors as well as cutting tool manufacturers, leading to two awarded patents.

Research interests:

Mechanics of material deformation in manufacturing processes
Materials deformation and failure analysis, using full field methods
Manufacturing processes induced structural integrity in metals and composites
Development of predictive tools, numerical, analytical and data driven, for prediction of materials performance during processing and service life
Machining and shear cutting systems' performance assessment, including forming and cutting tools

Research interests

Dr Ghadbeigi’s research interests cover a wide range of multidisciplinary topics on mechanics of materials deformation and damage in manufacturing processes such as machining and forming as well as manufacturing induced effects on the structural integrity and functional performance of produced parts.

Mechanics of machining and structural integrity are of his main research themes where Dr Ghadbeigi and his team develop experimental methods and numerical and analytical tools to predict chip formation in engineering materials and associated surface integrity based on the physics of deformation and failure.

Hassan has pioneered application of a range of experimental techniques, such as Digital Image correlation and microgrid techniques, to characterise local deformation and failure mechanisms in materials.

He has been involved in several project linked to manufacturing and machining science in collaboration Advanced Manufacturing Research Centre at the University of Sheffield.

The developed methodologies are already implemented for production of aerospace and automotive components and materials; however, these could be applicable wherein materials experience any mode of deformation as part of their processing history.

Current research activities

Damage and fracture of spot welds in automotive steels
Local damage and deformation analysis of multiphase high strength automotive steels (Dual phase, TRIP and Complex phase)
Modelling of blanking induced defects on magnetic performance of electrical steels
Finite element modelling of drilling in metallic materials
Distortion analysis and control in hybrid manufacturing
Microstructural sensitive model for deformation of Ti-6Al-4V alloys
Machining Induced White Layers: Quantitative Characterization, Non-destructive detection and Finite Element simulation
Modelling and characterisation of mechanics of deformation during chip formation

Publications

Journal articles

Jamshidi H, Bagherzadeh A, Budak E & Ghadbeigi H (2024) A predictive wear model in grinding using single-layer electroplated cBN tools. Journal of Manufacturing Processes, 127, 251-258.
Jones LM, Winter A, Tinkler L, Jewell GW & Ghadbeigi H (2024) Influence of remote laser cutting on magnetic loss and mechanical properties in 0.2 mm silicon steel. Journal of Magnetism and Magnetic Materials, 172400-172400.
Attia H, Sadek A, Altintas Y, Matsubara A, Umbrello D, Wegener K, Eisseler R, Ducobu F & Ghadbeigi H (2024) Physics based models for characterization of machining performance – A critical review. CIRP Journal of Manufacturing Science and Technology, 51, 161-189.
Ghadbeigi H, Taghizadeh S, Ayvar-Soberanis S & Baines W (2024) An analytical power-based approach to predict orthogonal cutting force for sintered Al2124/SiC metal matrix composite. CIRP Annals.
Ullrich K, von Elling M, Gutzeit K, Dix M, Weigold M, Aurich JC, Wertheim R, Jawahir IS & Ghadbeigi H (2024) AI-based optimisation of total machining performance: A review. CIRP Journal of Manufacturing Science and Technology, 50, 40-54.
Coimbra Gonçalves MC, Alsters R, Curtis D, M’Saoubi R & Ghadbeigi H (2024) Evolution of surface quality in micromilling Ti-6A1-4V alloy with increasing machined length. Procedia CIRP, 123, 221-226.
Freeman FSHB, Jones L, Goodall A, Ghadbeigi H & Todd I (2024) Structural metamaterial lattices by laser powder-bed fusion of 17-4PH steel. Additive Manufacturing Letters, 8. View this article in WRRO
Chen X, Wu H, Ede JD, Jewell GW, Jones LM & Ghadbeigi H (2023) A model to account for magnetic permeability changes resulting from edge damage caused by laser cutting in a high performance cobalt-iron alloy. Journal of Magnetism and Magnetic Materials, 171081-171081.
Jamshidi H, Mejías FC & Ghadbeigi H (2023) A Finite Element Assessment of The Workpiece Plastic Deformation in Machining of Ti-6Al-4V. Procedia CIRP, 117, 62-67.
Ashworth S, Fairclough JPA, Meredith J, Takikawa Y & Kerrigan K (2022) Effects of tool coating and tool wear on the surface quality and flexural strength of slotted CFRP. Wear, 498-499.
Monoranu M, Mitchell RL, Kerrigan K, Fairclough JPA & Ghadbeigi H (2022) The effect of particle reinforcements on chip formation and machining induced damage of modified epoxy carbon fibre reinforced polymers (CFRPs). Composites Part A: Applied Science and Manufacturing, 154. View this article in WRRO
Monoranu M, Ghadbeigi H, Patrick J, Fairclough A & Kerrigan K (2021) Chip formation mechanism during orthogonal cutting of rubber microparticles and silica nanoparticles modified epoxy polymers. Procedia CIRP, 103, 176-181. View this article in WRRO
Ashworth S, Fairclough JPA, Monoranu M, Ghadbeigi H, Meredith J, Takikawa Y & Kerrigan K (2020) Epifluorescent microscopy of edge-trimmed carbon fibre-reinforced polymers : an alternative to computed tomography scanning. Advanced Composites Letters, 29. View this article in WRRO
Monoranu M, Ashworth S, M’Saoubi R, Fairclough JP, Kerrigan K, Scaife RJ, Barnes S & Ghadbeigi H (2019) A comparative study of the effects of milling and abrasive water jet cutting on flexural performance of CFRP. Procedia CIRP, 85, 277-283. View this article in WRRO
Brown M, Crawforth P, M'Saoubi R, Larsson T, Wynne B, Mantle A & Ghadbeigi H (2019) Quantitative characterization of machining-induced white layers in Ti–6Al–4V. Materials Science and Engineering: A, 764. View this article in WRRO
JENKINS SNM, OULTON TH, HERNANDEZ-NAVA E, GHADBEIGI H, TODD I & GOODALL R (2019) Anisotropy in the mechanical behavior of Ti6Al4V electron beam melted lattices. Mechanics Research Communications. View this article in WRRO
Goodall R, Hernandez-Nava E, Jenkins SNM, Sinclair L, Tyrwhitt-Jones E, Khodadadi MA, Ip DH & Ghadbeigi H (2019) The effects of defects and damage in the mechanical behavior of Ti6Al4V lattices. Frontiers in Materials, 6. View this article in WRRO
Pritchard T, Smith C, Ghadbeigi H, Galindo-Fernandez M, Gilbert M & Ayvar-Soberinas S (2019) Modelling orthogonal and oblique cutting via discontinuity layout optimization. Procedia CIRP, 82, 37-42. View this article in WRRO
Nioi M, Pinna C, Celotto S, Swart E, Farrugia D, Zul H & Ghadbeigi H (2019) Finite element modelling of surface defect evolution during hot rolling of Silicon steel. Journal of Materials Processing Technology, 268, 181-191. View this article in WRRO
Mumtaz K, Ghadbeigi H, Hosseinzadeh F, Oliveira J & Mumtaz K (2019) Effect of pre-emptive in-situ parameter modification on residual stress distributions within selective laser melted Ti6Al4V components. The International Journal of Advanced Manufacturing Technology. View this article in WRRO
Ashworth S, Fairclough JPA, Takikawa Y, Scaife RJ, Ghadbeigi H, Kerrigan KM & Meredith J (2019) Effects of machine stiffness and cutting tool design on the surface quality and flexural strength of edge trimmed carbon fibre reinforced polymers. Composites Part A: Applied Science and Manufacturing. View this article in WRRO
Duboust N, Pinna C, Ghadbeigi H, Collis A, Ayvar-Soberanis S, Kerrigan K & Scaife R (2019) FE modelling of CFRP machining- prediction of the effects of cutting edge rounding. Procedia CIRP, 82, 59-64. View this article in WRRO
Ducobu F, Rivière-Lorphèvre E, Galindo-Fernandez M, Ayvar-Soberanis S, Arrazola P-J & Ghadbeigi H (2019) Coupled Eulerian-Lagrangian (CEL) simulation for modelling of chip formation in AA2024-T3. Procedia CIRP, 82, 142-147. View this article in WRRO
Galindo-Fernandez M, Mumtaz KA, Rivera-Diaz-del-Castillo PEJ, Galindo-Nava EI & Ghadbeigi H (2018) A microstructure sensitive model for deformation of Ti-6Al-4V describing Cast-and-Wrought and Additive Manufacturing morphologies. Materials and Design, 160, 350-362. View this article in WRRO
Brown M, Wright D, M'Saoubi R, McGourly J, Wallis M, Mantle A, Crawforth P & Ghadbeigi H (2018) Destructive and non-destructive testing methods for characterization and detection of machining-induced white layer: A review paper. CIRP Journal of Manufacturing Science and Technology. View this article in WRRO
Ali H, Ghadbeigi H & Mumtaz KA (2018) Processing parameter effects on residual stress and mechanical properties of Selective Laser Melted Ti6Al4V. Journal of Materials Engineering and Performance, 27(8), 4059-4068. View this article in WRRO
Celotto S, Ghadbeigi H, Pinna C, Shollock BA & Efthymiadis P (2018) Deformation-Induced Microstructural Banding in TRIP Steels. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 49(7), 2893-2906. View this article in WRRO
Mumtaz KA, Ghadbeigi H & Ali H (2018) Residual stress development in selective laser-melted Ti6Al4V: a parametric thermal modelling approach. The International Journal of Advanced Manufacturing Technology. View this article in WRRO
Alborzi E, Blakey S, Ghadbeigi H & Pinna C (2018) Prediction of growth of jet fuel autoxidative deposits at inner surface of a replicated jet engine burner feed arm. Fuel, 214, 528-537. View this article in WRRO
Ali H, ghadbeigi H & Mumtaz KA (2018) Effect of scanning strategies on residual stress and mechanical properties of Selective Laser Melted Ti6Al4V. Materials Science and Engineering: A, 712, 175-187. View this article in WRRO
Palmer JW, Ghadbeigi H, Curtis D & Novovic D (2018) An Experimental Study of the Effects of Dressing Parameters on the Topography of Grinding Wheels during Roller Dressing. Journal of Manufacturing Processes, 31, 348-355. View this article in WRRO
Nioi M, Celotto S, Pinna C, Swart E & Ghadbeigi H (2017) Surface defect evolution in hot rolling of high-Si electrical steels. Journal of Materials Processing Technology, 249, 302-312. View this article in WRRO
Ghaei A, Khosravi M, Badrossamay M & Ghadbeigi H (2017) Micro-dimple rolling operation of metallic surfaces. International Journal of Advanced Manufacturing Technology. View this article in WRRO
Duboust N, Pinna C, Ghadbeigi H, Ayvar-Soberanis S, Phadnis VA, Collis A & Kerrigan K (2017) 2D and 3D Finite Element Models for the Edge Trimming of CFRP. Procedia CIRP, 58, 233-238. View this article in WRRO
Ali H, Ma L, Ghadbeigi H & Mumtaz K (2017) In-situ residual stress reduction, martensitic decomposition and mechanical properties enhancement through high temperature powder bed pre-heating of Selective Laser Melted Ti6Al4V. Materials Science and Engineering: A, 695, 211-220. View this article in WRRO
Duboust N, Ghadbeigi H, Pinna C, Ayvar-Soberanis S, Collis A, Scaife R & Kerrigan K (2017) An optical method for measuring surface roughness of machined carbon fibre-reinforced plastic composites. Journal of Composite Materials, 51(3), 289-302. View this article in WRRO
Alborzi E, Blakey S, Ghadbeigi H, Pinna C & Lewis C (2016) Investigation of surface deposition in a simulated fuel injector feed arm with sudden expansion/contraction. Fuel, 186, 534-543. View this article in WRRO
Efthymiadis P, Dashwood R, Shollock B, Curry L, Ghadbeigi H, Barrow A & Robertson D (2016) Multiscale characterisation of the mechanical properties of austenitic stainless steel joints. Materials Science and Engineering A, 676, 324-335. View this article in WRRO
Duboust N, Melis D, Pinna C, Ghadbeigi H, Collis A, Ayvar-Soberanis S & Kerrigan K (2016) Machining of Carbon Fibre: Optical Surface Damage Characterisation and Tool Wear Study. Procedia CIRP, 45, 71-74. View this article in WRRO
Alharbi K, Ghadbeigi H, Efthymiadis P, Zanganeh M, Celotto S, Dashwood R & Pinna C (2015) Damage in dual phase steel DP1000 investigated using digital image correlation and microstructure simulation. Modelling and Simulation in Materials Science and Engineering, 23(8). View this article in WRRO
Ghadbeigi H, Pinna C & Celotto S (2013) Failure mechanisms in DP600 steel: Initiation, evolution and fracture. Materials Science and Engineering A, 588, 420-431. View this article in WRRO
Thornton RW, Slatter T & Ghadbeigi H (2013) Effects of deep cryogenic treatment on the dry sliding wear performance of ferrous alloys. Wear, 305(1-2), 177-191.
Asgari A, Ghadbeigi H, Pinna C & Hodgson PD (2013) Multi-scale modelling of stress and strain partitioning in high strength dual phase steel. Computer Methods in Materials Science, 12, 163-174.
Ghadbeigi H, Pinna C & Celotto S (2012) Quantitative strain analysis of the large deformation at the scale of microstructure: comparison between Digital Image Correlation and Microgrid techniques. Experimental Mechanics. View this article in WRRO
Ghadbeigi H, Pinna C, Celotto S & Yates JR (2010) Local plastic strain evolution in a high strength dual-phase steel. MAT SCI ENG A-STRUCT, 527(18-19), 5026-5032. View this article in WRRO
Ghadbeigi H, Pinna C, Celotto S & Yates JR (2010) Strain evolution measurement at the microscale of a dual phase steel using Digital Image Correlation. Applied Mechanics and Materials, 24-25, 201-206. View this article in WRRO
H-Gangaraj SM, Farrahi GH & Ghadbeigi H (2010) On the temperature and residual stress field during grinding. WCE 2010 - World Congress on Engineering 2010, 2, 1196-1200.
Ghadbelgi H, Bradbury SR, Pinna C & Yates JR (2008) Determination of micro-scale plastic strain caused by orthogonal cutting. INT J MACH TOOL MANU, 48(2), 228-235. View this article in WRRO
Farrahi GH & Ghadbeigi H (2006) An investigation into the effect of various surface treatments on fatigue life of a tool steel. Journal of Materials Processing Technology, 174(1-3), 318-324.
Pedrazzini S, Pek ME, Ackerman AK, Cheng Q, Ali H, Ghadbeigi H, Mumtaz K, Dessolier T, Britton TB, Bajaj P , Jägle E et al () Effect of substrate bed temperature on solute segregation and mechanical properties in Ti–6Al–4V produced by laser powder bed fusion. Metallurgical and Materials Transactions A.
Pietrow N, Curtis D, Novovic D, McGourlay J & Ghadbeigi H () Evolution of electroplated cBN tool surface texture parameters during point grinding. Journal of Manufacturing Science and Engineering.
Pedrazzini S, Pek ME, Ackerman AK, Ali H, Ghadbeigi H, Mumtaz K, Dessolier T, Britton TB, Bajaj P, Jägle E , Gault B et al () Influence of powder-bed temperature on the microstructure and mechanical properties of Ti-6Al-4V produced by selective laser melting. View this article in WRRO
Ghadbeigi H, Al-RUBAYE A, Robinson FCJ, Hawezy D, Birosca S & Atallah K () Blanking induced damage in thin 3.2 % silicon steel sheets. Production engineering. View this article in WRRO
Priest J, Ghadbeigi H, Avar-Soberanis S & Gerardis S () 3D Finite Element Modelling of Drilling: The Effect of Modelling Method. CIRP Journal of Manufacturing Science and Technology.
Priest J, Ghadbeigi H, Ayvar-Soberanis S & Liljerehn A () Effects of coefficient of friction coupled with a deformation dependent friction model in cutting simulations. Procedia CIRP.
Brown M, M'saoubi R, Crawforth P, Mantle A, McGourlay J & Ghadbeigi H () On deformation characterisation of machined surfaces and machining-induced white layers in a milled titanium alloy. Journal of Materials Processing Technology.
Jahangiri H, Mohagheghi S, Asgari Alamdari A, Yilmaz R, Gurcan Bayrak K, Yu F, Ghadbeigi H, Ayas E & Motallebzadeh A () Microstructure development and mechanical performance of Al2CrFeMnTi light-weight high entropy alloy. Intermetallics.

Chapters

Taghizadeh S, Bonney MS, Wagg D & Ghadbeigi H (2025) Tribo-Dynamics Digital Twins (TDDTs): Prediction of Friction and Frequency Response Function (FRF) in a Dry Sliding Tribological Contact, Conference Proceedings of the Society for Experimental Mechanics Series (pp. 101-110). Springer Nature Switzerland
Rohaizat NI, Alharbi K, Pinna C, Ghadbeigi H, Hanlon DN & Azid IA (2021) Using a Correction Factor to Remove Machine Compliance in a Tensile Test on DP1000 Steel Validated with 2D Digital Image Correlation Technique, Progress in Engineering Technology III (pp. 113-123).
Rohaizat NI, Pinna C, Ghadbeigi H, Hanlon DN, Azid IA & Sharif SM (2021) Out-of-Plane Surface Deformation Measurement of Advanced High Strength Steel Using 3D DIC, Progress in Engineering Technology III (pp. 285-295).

Conference proceedings papers

Priest J, Ghadbeigi H, Ayvar-Soberanis S, Liljerehn A & Way M (2022) Analysis of the contact mechanics in machining using a novel high-speed tribometer. Procedia CIRP, Vol. 108 (pp 123-128). Lyon, France, 8 June 2022 - 10 June 2022.
Priest J, Ghadbeigi H, Ayvar-Soberanis S, Liljerehn A & Way M (2022) A modified Johnson-Cook constitutive model for improved thermal softening prediction of machining simulations in C45 steel. Procedia CIRP, Vol. 108 (pp 106-111). Lyon, France, 8 June 2022 - 10 June 2022. View this article in WRRO
Brown M, Ghadbeigi H, Crawforth P, M’Saoubi R, Mantle A, McGourlay J & Wright D (2020) Non-destructive detection of machining-induced white layers in ferromagnetic alloys. Procedia CIRP, Vol. 87 (pp 420-425). Mondragon, Spain, 1 June 2020 - 5 June 2020. View this article in WRRO
Dowding R, Pinna C, Ghadbeigi H & Farrugia D (2020) Analyzing the properties promoting shear bands and damage initiation in 3-point bending of ultra-high strength steel. Procedia Manufacturing, Vol. 50 (pp 570-573). Krakow, Poland, 13 September 2020 - 16 September 2020. View this article in WRRO
Palmer J, Curtis D, Novovic D & Ghadbeigi H (2018) The Influence of Abrasive Grit Morphology on Wheel Topography and Grinding Performance. Procedia CIRP, Vol. 77 (pp 239-242), 25 June 2018 - 27 June 2018. View this article in WRRO
Dowding RG, Pinna C, Ghadbeigi H & Farrugia D (2018) Localized damage analysis for high strength S960 steel using micro-tensile testing and digital image correlation. Ubiquity Proceedings, Vol. 1(S1) (pp 16-16). Swansea, Wales, 10 July 2018 - 12 July 2018. View this article in WRRO
Al-Rubaye A, Atallah K & Ghadbeigi H (2016) Experimental strain measurement in a blanking operation. 11th BSSM International Conference on Advanced in Experimental Mechanics, Exeter, UK
Duboust N, Melis D, Pinna C, Ghadbeigi H, Collis A, Ayvar-Soberanis S & Kerrigan K (2016) Machining of carbon fibre: optical surface damage characterisation and tool wear study. 3rd CIRP Conference on Surface Integrity (CIRP CSI), Charlotte, NC, USA, 8 June 2016 - 10 June 2016.
Nioi M, Pinna C, Celotto S, Swart E & Ghadbeigi H (2016) Surface defect evolution in hot rolling of high Si-electrical steels. METAL 2016 - 25th Anniversary International Conference on Metallurgy and Materials, Conference Proceedings (pp 267-272)
Ghadbeigi H, Pinna C & Celotto S (2014) An investigation on the subsurface micro-cracking induced by coating process in automotive steels. 16th International Conference on Experimental Mechanics (ICEM 16). Cambridge, UK, 7 July 2014 - 11 July 2014.
Alharbi K, Ghadbeigi H, Zanganeh M, Celotto S & Pinna C (2014) Damage formation in dual phase steel: a combined approach of digital image correlation and microstructure modelling. 7th European conference on steel and composite structures (eurosteel 2014),. Napoli, Italy, 10 September 2014 - 12 September 2014.
Panoutsos G, Mumtaz KA & Ghadbeigi H (2013) Systematic modelling and real-time optimization for manufacturing complex geometries using Additive Manufacturing techniques. 2nd Annual EPSRC Manufacturing the Future Conference. Cranfield University, Cranfield, UK, 17 September 2013 - 18 September 2013.
Alharbi K, Ghadbeigi H, Zanganeh M & Pinna C (2013) A combined Digital Image Correlation-Finite Element modelling approach to investigate damage formation in dual phase steels. European Congress and Exhibition on Advanced Materials and Processes (EUROMAT) 2013. Sevilla, Spain, 8 September 2013 - 13 September 2013.
Ghadbeigi H, Pinna C & Celotto S (2012) An investigation into the failure mechanisms at the onset of necking in DP600 steel. 15th International Conference on Experimental Mechanics (ICEM 15). Porto- Portugal, 22 July 2012 - 27 July 2012.
Ghadbeigi H, Pinna C & Celotto S (2011) Local damage initiation mechanisms of a DP steel: surface observations vs. mid-plane deformation. EUROMAT 2011. Montpellier, France.. Montpellier, France, 12 September 2011 - 15 September 2011.
Alborzi E, Blakey SG, Ghadbeigi H, Pinna C, Pourkashanian M & Wilson CW (2011) Analysis of the structure of deposited materials at inner surface of jet fuel injector feed arm with Optical and Scanning Electron Microscopy. The 12th International conference on stability, handling and use of liquid fuels (IASH 2011). Sarasota, Florida USA., Vol. 2 (pp 1120-1148). Sarasota, Florida USA, 16 October 2011 - 20 October 2011.
Ghadbeigi H, Pinna C, Celotto S & Yates JR (2010) In-situ strain and damage analyses of Dual- Phase steels at micro-scale using Digital Image Correlation. The 2nd International Conference on Super High Strength Steel. Peschiera del Garda, Italy.. Peschiera del Garda, Italy, 17 October 2010 - 20 October 2010.
Ghadbeigi H, Bradbury SR, Pinna C & Yates JR (2009) On the Modelling of Chip Formation in Orthogonal Cutting:Damage Mechanics Approach. 12th CIRP conference on modelling of machining operations. Donostia-San sebastian, Spain., Vol. 1 (pp 77-82). Donostia-San sebastian, Spain, 7 May 2009 - 8 May 2009.
Ghadbeigi H, Bradbury SR, Pinna C & Yates JR (2007) Application of Electron Beam Lithography technique for the determination of micro-scale plastic strain due to machining. The 10th CIRP international workshop on modelling of machining operations. Reggio Calabria, Italy., Vol. 1 (pp 533-538). Reggio Calabria, Italy, 27 August 2007 - 28 August 2007.
Alharbi, K, Ghadbeigi H, Zanganeh M & Pinna C () A combined Digital Image Correlation-Finite Element modelling approach to investigate damage formation in Dual Phase steels. European Congress and Exhibition on Advanced Materials and Processes (EUROMAT) 2013. Sevilla, Spain, 8 September 2013 - 13 September 2013.
Pietrow N, Curtis D, Ghadbeigi H, Novovic D & McGourlay J () An investigation into the challenges of the point grinding machining process. Procedia CIRP

Preprints

Freeman F, Jones L, Goodall AD, Ghadbeigi H & Todd I () Architectured Metamaterial Structural Lattices by Laser Powder-Bed Fusion of 17-4PH Steel.

Grants

INNOVATE UK (TSB), Knowledge Transfer Partnership, Finish machining of TSP coating, 2019- 2022, £181,712(PI)
INNOVATE UK (TSB), Knowledge Transfer Partnership, Design of a Flexible Modular Clamping System, 2019 - 2021, £184,953(PI)
EU – H2020, Research and Innovation Staff Exchange (RISE), Fracture across Scales and Materials, Processes and Disciplines (FRAMED), 2017-2021, £142k (CI)
INNOVATE UK (TSB), Knowledge Transfer Partnership, Rapid Metal Cutting Simulation, 2017-2018, £29,620 (PI)

Teaching interests

Dr Ghadbeigi has taught second year (MEC 202, GEE 207) and fourth year (MEC 455) modules for Mechanical Engineering and General Engineering students.

The second-year courses, Mechanics of Deformable solids and Mechanics of Structure, are about analysis of elastic deformation and interaction of solid elements and structures using analytical methods.

The fourth-year course is a specialized course on Advanced conventional manufacturing technologies, including Machining and Forming, where mechanics of deformation and manufacturing induced defects are studied.

Professional activities and memberships

Co-Director of Industrial Doctorate Centre in Machining Science
Member of National Committee, British Society for Strain Measurement