Professor Jiabin Wang
PhD, MEng, BEng
School of Electrical and Electronic Engineering
Emeritus Professor
Electrical Machines and Drives Research Group
j.b.wang@sheffield.ac.uk
Full contact details
Professor Jiabin Wang
School of Electrical and Electronic Engineering
School of Electrical and Electronic Engineering
- Profile
-
I graduated with a BEng in 1982 and MSc in 1996 from Jiangsu University in China, and a PhD in 1996 from the University of East London, UK, respectively, all in electrical engineering.
I was an academic staff in Jiangsu University, from 1982 to 1983 and from 1986 to 1991, and a visiting academic researcher in Liverpool University, UK, from 1991 to 1992.
After working on multi-degrees of freedom rotary and linear electromagnetic actuation systems as a post-doctoral research associate at the University of Sheffield from 1997 to 1998, I joined the EEE department in the University of East as Senior Lecturer in 1998.
Since 2001, I have been with EEE Department at the University of Sheffield, being promoted to Reader in 2007 and Professor in 2010.
My research encompasses advanced control techniques for electrical drives, novel rotary and linear machines and drives, advanced electrical power-trains and ‘more-electric’ technologies and energy management strategies for electric and hybrid vehicles, and aircraft.
Currently, my research focuses on high integrity, fault tolerant and high efficiency electric drives and associated condition monitoring techniques for applications in aerospace, automotive and household appliances.
- Research interests
-
- Novel linear, rotary and multi-degrees of freedom permanent magnet machines and actuators, and their industrial applications
- High force density linear motors/actuators
- Power dense, highly efficient machines for traction applications
- Fault tolerant permanent magnet machines
- Fault detection and health monitoring of electric drives
- Control of fault-tolerant permanent magnet machines
- Efficiency optimised control of traction motors
- Electrical drive-trains and energy storage/management systems for electric and hybrid vehicles
- Vehicle-to-grid interface and bidirectional chargers for electric vehicles
- Power quality and stability of islanded power systems
- Publications
-
Journal articles
- Multiple Current Harmonics Suppression for Low-Inductance PMSM Drives with Deadbeat Predictive Current Control. IEEE Transactions on Industrial Electronics, 1-1.
- Remedy Strategy for Five-Phase FTPMMs Under Single-Phase Short-Circuit Fault by Injecting Harmonic Currents from Third Space. IEEE Transactions on Power Electronics, 1-1.
- A Low Coupling Fault Tolerant PMA-SynRM with Mixed-Pitch Segregated Windings. IEEE Transactions on Transportation Electrification.
- Comparative Study on Fault Tolerant Triple 3-phase PM Machine Drive with Five Modular Windings. IEEE Transactions on Industrial Electronics, 1-11.
- Short-circuit fault-tolerant control for five-phase fault-tolerant permanent magnet motors with trapezoidal back-EMF. Fundamental Research.
- Evaluation of waste heat recovery of electrical powertrain with electro-thermally coupled models for electric vehicle applications. Chinese Journal of Electrical Engineering, 7(3), 88-99.
- Deadbeat predictive current control for high-speed PMSM drives with low switching-to-fundamental frequency ratios. IEEE Transactions on Industrial Electronics.
- Anti-resonance phenomenon and peak voltage stress within PWM inverter fed stator winding. IEEE Transactions on Industrial Electronics. View this article in WRRO
- Mode Transition of Synchronous Optimal Modulation for High-Speed PMSM Drives. IEEE Transactions on Industry Applications.
- Transient Performance Improvement of Deadbeat Predictive Current Control of High-Speed Surface-Mounted PMSM Drives by Online Inductance Identification. IEEE Transactions on Industrial Electronics.
- Model Inaccuracy Analysis and Compensation of Stationary Frame-Based Deadbeat Predictive Current Control for High-Speed PMSM Drives. IEEE Transactions on Transportation Electrification.
- Electromagnetic-thermal coupled fault analysis of PMASynRM with turn-to-turn short circuit involving a few strands. IEEE Transactions on Industry Applications, 1-1.
- Electromagnetic and thermal behavior of a triple redundant 9-phase PMASynRM with insulation deterioration fault. IEEE Transactions on Industry Applications.
- High frequency voltage injection based stator inter-turn fault detection in permanent magnet machines. IEEE Transactions on Power Electronics. View this article in WRRO
- Integration of FOC with DFVC for interior permanent magnet synchronous machine drives. IEEE Access, 8, 97935-97945. View this article in WRRO
- Message from editors. CES Transactions on Electrical Machines and Systems, 4(2), 69-70.
- Transient 3D lumped parameter and 3D FE thermal models of a PMASynRM under fault conditions with asymmetric temperature distribution. IEEE Transactions on Industrial Electronics. View this article in WRRO
- Thermal Modelling of Hollow Conductors for Direct Cooling of Electrical Machines. IEEE Transactions on Industrial Electronics, 67(2), 895-905. View this article in WRRO
- Current residual based stator inter-turn fault detection in permanent magnet machines. IEEE Transactions on Industrial Electronics. View this article in WRRO
- Multi-parameter model order reduction for thermal modelling of power electronics. IEEE Transactions on Power Electronics. View this article in WRRO
- A Novel Axial Split Phase Bearingless Flywheel Machine with Hybrid-Inner-Stator Permanent Magnet-based Structure. IEEE Transactions on Energy Conversion, 1-1.
- Virtual-Stator-Flux-Based Direct Torque Control of Five-Phase Fault-Tolerant Permanent-Magnet Motor With Open-Circuit Fault. IEEE Transactions on Power Electronics, 35(5), 5007-5017.
- Reduced-order thermal observer for power modules temperature estimation. IEEE Transactions on Industrial Electronics. View this article in WRRO
- Electromagnetic-thermal coupled simulation under various fault conditions of a triple redundant 9-phase PMASynRM. IEEE Transactions on Industry Applications. View this article in WRRO
- Detection and classification of turn fault and high resistance connection fault in permanent magnet machines based on zero sequence voltage. IEEE Transactions on Power Electronics. View this article in WRRO
- Electromagnetic-thermal coupled modelling and analysis of inter-turn short-circuit faults of a permanent magnet alternator. The Journal of Engineering, 2019(17), 4426-4431. View this article in WRRO
- A Turn Fault Mitigation Strategy Based on Current Injection Technique for a Triple 3-phase PMA SynRM. IEEE Transactions on Industrial Electronics. View this article in WRRO
- Continuous demagnetisation assessment for triple redundant nine-phase fault-tolerant permanent magnet machine. The Journal of Engineering, 2019(17), 4359-4363. View this article in WRRO
- Effective Turn Fault Mitigation by Creating Zero Sequence Current Path for a Triple Redundant 3x3-phase PMA SynRM. IEEE Transactions on Power Electronics. View this article in WRRO
- Fast simulation of transient temperature distributions in power modules using multi-parameter model reduction. The Journal of Engineering, 2019(17), 3603-3608. View this article in WRRO
- Detection of humidity ingress using online common-mode insulation impedance-monitoring system. The Journal of Engineering, 2019(17), 4411-4414.
- On-Line Condition Monitoring for Diagnosis and Prognosis of Insulation Degradation of Inverter-fed Machines. IEEE Transactions on Industrial Electronics, 66(10), 8126-8135. View this article in WRRO
- Stator Turn Fault Modelling for a Triple Redundant 3x3-phase PMA SynRM. IEEE Transactions on Industrial Electronics. View this article in WRRO
- MTPA control of IPMSM drives based on virtual signal injection considering machine parameter variations. IEEE Transactions on Industrial Electronics, 65(8), 6089-6098. View this article in WRRO
- Active Thermal Management for Interior Permanent Magnet Synchronous Machine (IPMSM) Drives Based on Model Predictive Control. IEEE Transactions on Industry Applications. View this article in WRRO
- Investigation into Fault Tolerant Capability of a Triple Redundant PMA SynRM Drive. IEEE Transactions on Power Electronics, 34(2), 1611-1621. View this article in WRRO
- Quaternion-valued single-phase model for three-phase power system. Journal of Electrical Engineering, 69(2), 183-186. View this article in WRRO
- Stator Turn Fault Detection by Second Harmonic in Instantaneous Power for a Triple-Redundant Fault-Tolerant PM Drive. IEEE Transactions on Industrial Electronics, 65(9), 7279-7289. View this article in WRRO
- A General Modelling Technique for a Triple Redundant 3x3-phase PMA SynRM. IEEE Transactions on Industrial Electronics. View this article in WRRO
- Experimental Assessments of a Triple Redundant 9-Phase Fault Tolerant PMA SynRM Drive. IEEE Transactions on Industrial Electronics, 66(1), 772-783. View this article in WRRO
- A Fault Tolerant Machine Drive Based on Permanent Magnet Assisted Synchronous Reluctance Machine. IEEE Transactions on Industry Applications, 54(2), 1349-1359. View this article in WRRO
- Modeling, Design Optimization, and Verifications of Permanent Magnet Linear Actuators for Structural Vibration Mitigation Applications. IEEE Transactions on Magnetics, 53(11).
- Magnetomotive Force Harmonic Reduction Techniques for Fractional-Slot Non-Overlapping Winding Configurations in Permanent-Magnet Synchronous Machines. Chinese Journal of Electrical Engineering, 3(2), 102-113. View this article in WRRO
- Design Optimization and Test of a Radially Magnetized Magnetic Screw With Discretized PMs. IEEE Transactions on Industrial Electronics.
- Real-Time Measurement of Temperature Sensitive Electrical Parameters in SiC Power MOSFETs. IEEE Transactions on Industrial Electronics, 65(3), 2663-2671. View this article in WRRO
- Experimental Validation of 3D Magnet Eddy Current Loss Prediction in Surface Mounted Permanent Magnet Machines. IEEE Transactions on Industry Applications. View this article in WRRO
- Real-Time Hardware-in-the-Loop Simulation of Permanent Magnet Synchronous Motor Drives under Stator Faults. IEEE Transactions on Industrial Electronics, 64(9), 6960-6969. View this article in WRRO
- Rotor Position Estimation of a Pseudo Direct Drive PM machine using Extended Kalman Filter. IEEE Trans. on Industry Applications, 53(2), 1088-1095. View this article in WRRO
- PWM Ripple Currents Based Turn Fault Detection for Multiphase Permanent Magnet Machines. IEEE Trans. on Industry Applications. View this article in WRRO
- Analytical Prediction of 3D Magnet Eddy Current Losses in Surface Mounted PM Machines Accounting Slotting Effect. IEEE Transactions on Energy Conversion. View this article in WRRO
- On Accuracy of Virtual Signal Injection based MTPA Operation of Interior Permanent Magnet Synchronous Machine Drives. IEEE Transactions on Power Electronics. View this article in WRRO
- A High-Fidelity Computationally Efficient Transient Model of Interior Permanent-Magnet Machine With Stator Turn Fault. IEEE Transactions on Industrial Electronics, 63(2), 773-783. View this article in WRRO
- PWM Harmonic Signature Based Islanding Detection for a Single-Phase Inverter with PWM Frequency Hopping. IEEE Transactions on Industry Applications, 53(1), 411-419. View this article in WRRO
- Assessment of cogging-force-reduction techniques applied to fractional-slot linear permanent magnet motors equipped with non-overlapping windings. IET Electric Power Applications, 10(8), 697-705.
- Self-learning Direct Flux Vector Control of Interior Permanent Magnet Machine Drives. IEEE Transactions on Power Electronics. View this article in WRRO
- Performance Improvement of Direct Torque Controlled IPM Drives by Employing a Linear Combination of Current and Voltage Based Flux Observers. IET Power Electronics, 9(10), 2052-2059. View this article in WRRO
- Computationally efficient 3D analytical magnet loss prediction in surface mounted permanent magnet machines. IET Electric Power Applications. View this article in WRRO
- Computationally Efficient 3-D Eddy Current Loss Prediction in Magnets of Interior Permanent Magnet Machines. IEEE Transactions on Magnetics, 52(10). View this article in WRRO
- Prediction of 3-D High-Frequency Eddy Current Loss in Rotor Magnets of SPM Machines. IEEE Transactions on Magnetics, 52(9). View this article in WRRO
- An Analytical Method for Predicting 3-D Eddy Current Loss in Permanent Magnet Machines Based on Generalized Image Theory. IEEE Transactions on Magnetics, 52(6). View this article in WRRO
- Post-demagnetization performance assessment for interior permanent magnet AC machines. IEEE Transactions on Magnetics, 52(4). View this article in WRRO
- Virtual Signal Injection-Based Direct Flux Vector Control of IPMSM Drives. IEEE Transactions on Industrial Electronics, 63(8), 4773-4782. View this article in WRRO
- A Nine-Phase 18-Slot 14-Pole Interior Permanent Magnet Machine with Low Space Harmonics for Electric Vehicle Applications. IEEE Transactions on Energy Conversion, 31(3), 860-871. View this article in WRRO
- Design and Analysis of a Linear Permanent-Magnet Vernier Machine With Improved Force Density. IEEE Transactions on Industrial Electronics, 63(4), 3148-3157.
- Self-Learning MTPA Control of Interior Permanent-Magnet Synchronous Machine Drives Based on Virtual Signal Injection. IEEE Transactions on Industry Applications, 52(4), 3062-3070. View this article in WRRO
- An Inverter Nonlinearity-Independent Flux Observer for Direct Torque-Controlled High-Performance Interior Permanent Magnet Brushless AC Drives. IEEE Transactions on Power Electronics, 32(1), 490-502. View this article in WRRO
- Stator Interturn Fault Detection in Permanent-Magnet Machines Using PWM Ripple Current Measurement. IEEE Transactions on Industrial Electronics, 63(5), 3148-3157. View this article in WRRO
- Enhanced Availability of Drivetrain Through Novel Multiphase Permanent-Magnet Machine Drive. IEEE Transactions on Industrial Electronics, 63(1), 469-480. View this article in WRRO
- Switching technique for minimisation of DC-link capacitance in switched reluctance machine drives. IET Electrical Systems in Transportation, 5(4), 185-193. View this article in WRRO
- Performance evaluation of fractional-slot tubular permanent magnet machines with low space harmonics. Archives of Electrical Engineering, 64(4), 655-668. View this article in WRRO
- Design and Analysis of a Halbach Magnetized Magnetic Screw for Artificial Heart. IEEE Transactions on Magnetics, 51(11), 1-4. View this article in WRRO
- Reduced Dysprosium Permanent Magnets and Their Applications in Electric Vehicle Traction Motors. IEEE Transactions on Magnetics, 51(11), 1-4. View this article in WRRO
- Effect of Laser Cut on the Performance of Permanent Magnet Assisted Synchronous Reluctance Machines. IEEE Transactions on Magnetics, 51(11), 1-4. View this article in WRRO
- Optimization and Analysis of a Yokeless Linear Flux-Switching Permanent Magnet Machine With High Thrust Density. IEEE Transactions on Magnetics, 51(11), 1-4. View this article in WRRO
- 3-D Effects of Rotor Step-Skews in Permanent Magnet-Assisted Synchronous Reluctance Machines. IEEE Transactions on Magnetics, 51(11), 1-4. View this article in WRRO
- Extension of Virtual-Signal-Injection-Based MTPA Control for Interior Permanent-Magnet Synchronous Machine Drives Into the Field-Weakening Region. IEEE Transactions on Industrial Electronics, 62(11), 6809-6817. View this article in WRRO
- Stationary Frame Fault Tolerant Current Control of Poly-phase Permanent Magnet Machines under Open-Circuit and Short-Circuit Faults. IEEE Transactions on Power Electronics, 31(7), 4684-4696.
- A High-Fidelity and Computationally Efficient Electrothermally Coupled Model for Interior Permanent-Magnet Machines in Electric Vehicle Traction Applications. IEEE Transactions on Transportation Electrification, 1(4), 336-347. View this article in WRRO
- Maximum Torque Per Ampere (MTPA) Control for Interior Permanent Magnet Synchronous Machine Drives Based on Virtual Signal Injection. IEEE Transactions on Power Electronics, 30(9), 5036-5045. View this article in WRRO
- A High-Fidelity and Computationally Efficient Model for Interior Permanent-Magnet Machines Considering the Magnetic Saturation, Spatial Harmonics, and Iron Loss Effect. IEEE Transactions on Industrial Electronics, 62(7), 4044-4055. View this article in WRRO
- Demagnetization Assessment of Fractional-Slot and Distributed Wound 6-Phase Permanent Magnet Machines. IEEE Transactions on Magnetics, 51(6), 1-11. View this article in WRRO
- Slip Recovery and Prevention in Pseudo Direct Drive Permanent-Magnet Machines. IEEE Transactions on Industry Applications, 51(3), 2291-2299. View this article in WRRO
- Influence of Control Structures and Load Parameters on Performance of a Pseudo Direct Drive. Machines, 2(3), 158-175. View this article in WRRO
- A Generic Approach to Reduction of Magnetomotive Force Harmonics in Permanent-Magnet Machines With Concentrated Multiple Three-Phase Windings. IEEE Transactions on Magnetics, 50(11), 1-4.
- Accurate (d) –({q}) Axis Modeling of Synchronous Machines With Skew Accounting for Saturation. IEEE Transactions on Magnetics, 50(11), 1-4.
- A Yokeless Linear Permanent Magnet Machine. IEEE Transactions on Magnetics, 50(11), 1-4.
- Speed Control for a Pseudo Direct Drive Permanent-Magnet Machine With One Position Sensor on Low-Speed Rotor. IEEE Transactions on Industry Applications, 50(6), 3825-3833.
- A Computationally Efficient Design Technique for Electric-Vehicle Traction Machines. IEEE Transactions on Industry Applications, 50(5), 3203-3213.
- Six-Phase Fractional-Slot-per-Pole-per-Phase Permanent-Magnet Machines With Low Space Harmonics for Electric Vehicle Application. IEEE Transactions on Industry Applications, 50(4), 2554-2563. View this article in WRRO
- Fractional-Slot Permanent Magnet Brushless Machines with Low Space Harmonic Contents. IEEE Transactions on Magnetics, 50(1), 1-9.
- Design optimization of a surface-mounted permanent-magnet motor with concentrated windings for electric vehicle applications. IEEE Transactions on Vehicular Technology, 62(3), 1053-1064.
- Design and implementation of an observer-based state feedback controller for a pseudo direct drive. IET Electric Power Applications, 7(8), 643-653.
- A rotor with axially and circumferentially magnetized permanent magnets. IEEE Transactions on Magnetics, 48(11), 3230-3233.
- Torque distribution strategy for a front- and rear-wheel-driven electric vehicle. IEEE Transactions on Vehicular Technology, 61(8), 3365-3374.
- Review of variable-flux permanent magnet machines. Journal of International Conference on Electrical Machines and Drives, 1(1), 23-31.
- Testing and experimental characterisation of a linear permanent magnet actuator for active vehicle suspension. Journal of Electrical Machines and Systems, 1(4), 113-120.
- Design and operation of a magnetic continuously variable transmission. IEEE Transactions on Industry Applications, 48(4), 1288-1295.
- Large signal stability analysis of 'more electric' aircraft power systems with constant power loads. IEEE Transactions on Aerospace and Electronic Systems, 48(1), 477-489.
- Modeling and stability analysis of hybrid power systems for the more electric aircraft. Electric Power Systems Research, 82(1), 59-67.
- A magnetic continuously variable transmission device. IEEE Transactions on Magnetics, 47(10), 2815-2818.
- Design and realization of a linear magnetic gear. IEEE Transactions on Magnetics, 47(10), 4171-4174.
- Analysis of a magnetic screw for high force density linear electromagnetic actuators. IEEE Transactions on Magnetics, 47(10), 4477-4480.
- A brushless permanent magnet machine with integrated differential. IEEE Transactions on Magnetics, 47(10), 4246-4249.
- A linear permanent-magnet motor for active vehicle suspension. IEEE Transactions on Vehicular Technology, 60(1), 55-63.
- A learning feed-forward current controller for linear reciprocating vapor compressors. IEEE Transactions on Industrial Electronics, 58(8), 3383-3390.
- Prediction and measurement of iron loss in a short-stroke, single-phase, tubular permanent magnet machine. IEEE Transactions on Magnetics, 46(6), 1315-1318.
- Design and control of a linear electromagnetic actuator for active vehicle suspension. Advanced Microsystems for Automotive Applications, 311-323.
- Rotor eddy-current loss in permanent-magnet brushless AC machines. IEEE Transactions on Magnetics, 46(7), 2701-2707. View this article in WRRO
- Design optimization of short-stroke single-phase tubular permanent-magnet motor for refrigeration applications. IEEE Transactions on Industrial Electronics, 57(1), 327-334.
- Enhanced optimal torque control of fault-tolerant PM machine under flux-weakening operation. IEEE Transactions on Industrial Electronics, 57(1), 344-353.
- An online winding fault detection technique for fault-tolerant PM machines. International Journal of Systems Science, 40(3), 289-296.
- Analytical prediction of the short-circuit current in fault-tolerant permanent-magnet machines. IEEE Transactions on Industrial Electronics, 55(12), 4210-4217.
- Analysis and experimental verification of a single-phase, quasi-Halbach magnetized tubular permanent magnet motor with non-ferromagnetic support tube. IEEE Transactions on Magnetics, 44(11(2)), 4361-4364.
- Design considerations for tubular flux-switching permanent magnet machines. IEEE Transactions on Magnetics, 44(11), 4026-4032.
- Modular three-phase permanent-magnet brushless machines for in-wheel applications. IEEE Transactions on Vehicular Technology, 57(5), 2714-2720.
- Demagnetization assessment for three-phase tubular brushless permanent-magnet machines. IEEE Transactions on Magnetics, 44(9), 2195-2203.
- Analysis of a short-stroke, single-phase, quasi-Halbach magnetised tubular permanent magnet motor for linear compressor applications. IET Electric Power Applications, 2(3), 193-200.
- A tubular flux-switching permanent magnet machine. Journal of Applied Physics, 103(7).
- Testing of a 250-kilowatt fault-tolerant permanent magnet power generation system for aeroengines. Journal of Propulsion and Power, 24(2), 330-335.
- Analysis of a short-stroke, single-phase tubular permanent-magnet actuator for reciprocating compressors. Electromotion, 15(2), 57-62.
- A power shaping stabilizing control strategy for dc power systems with constant power loads. IEEE Transactions on Power Electronics, 23(6), 2982-2989.
- A novel linear drive for next-generation reciprocating vapor compressors. IEEJ Transactions on Electrical and Electronic Engineering, 3(5), 455-463.
- Characteristics of linear compressors under current source excitation. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy, 221(7), 1057-1065.
- Effect of axial segmentation of permanent magnets on rotor loss in modular permanent-magnet brushless machines. IEEE Transactions on Industry Applications, 43(5), 1207-1213.
- Experimental characterization of a super-capacitor based electrical torque-boost system for downsized ICE vehicles. IEEE Transactions on Vehicular Technology, 56(6 II), 3674-3681. View this article in WRRO
- Design and experimental verification of a linear permanent magnet generator for a free-piston energy converter. IEEE Transactions on Energy Conversion, 22(2), 299-306.
- Radial force density and vibration characteristics of modular permanent magnet brushless AC machine. IEE Proceedings: Electric Power Applications, 153(6), 793-801.
- Three-dimensional analysis of tubular permanent magnet machines. Journal of Applied Physics, 99(8).
- A novel high-performance linear magnetic gear. IEEJ Transactions on Industry Applications, 126(10).
- Design of a miniature permanent-magnet generator and energy storage system. IEEE Transactions on Industrial Electronics, 52(5), 1383-1390. View this article in WRRO
- Armature reaction field and inductances of tubular modular permanent magnet machines. Journal of Applied Physics, 97(10).
- A high-performance linear magnetic gear. Journal of Applied Physics, 97(10).
- Cogging-force-reduction techniques for linear permanent-magnet machines. IEE Proceedings: Electric Power Applications, 152(3), 731-738.
- Three-phase interior-mounted magnet modular brushless machines for automotive applications. Electromotion, 12(2-3), 125-132.
- Analytical prediction of eddy-current loss in modular tubular permanent-magnet machines. IEEE Transactions on Energy Conversion, 20(4), 761-770.
- Analysis of motor loss in permanent magnet brushless motors. JFE Technical Report(6), 18-23.
- Influence of soft magnetic materials on the design and performance of tubular permanent magnet machines. IEEE Transactions on Magnetics, 41(10), 4057-4059. View this article in WRRO
- Tubular modular permanent-magnet machines equipped with quasi-Halbach magnetized magnets - Part II: Armature reaction and design optimization. IEEE Transactions on Magnetics, 41(9), 2479-2489. View this article in WRRO
- Tubular modular permanent-magnet machines equipped with quasi-Halbach magnetized magnets - Part I: Magnetic field distribution, EMF, and thrust force. IEEE Transactions on Magnetics, 41(9), 2470-2478. View this article in WRRO
- Real-time optimal torque control of fault-tolerant permanent magnet brushless machines. Journal of Applied Physics, 97(10).
- Three-phase modular permanent magnet brushless machine for torque boosting on a downsized ICE vehicle. IEEE Transactions on Vehicular Technology, 54(3), 809-816. View this article in WRRO
- Stator iron loss of tubular permanent-magnet machines. IEEE Transactions on Industry Applications, 41(4), 989-995. View this article in WRRO
- Rotor eddy-current loss in permanent magnet brushless machines. IEEE Transactions on Magnetics, 40(4 II), 2104-2106. View this article in WRRO
- Analysis and design optimization of an improved axially magnetized tubular permanent-magnet machine. IEEE Transactions on Energy Conversion, 19(2), 289-295. View this article in WRRO
- Analytical modeling of the air-gap field in reciprocating moving-magnet actuators. Journal of Magnetism and Magnetic Materials, 272-276(Supplement 1), 1783-1785.
- A spherical permanent magnet actuator for a high-fidelity force-feedback joystick. Mechatronics, 14(3), 327-339.
- Analysis of axially magnetised, iron-cored, tubular permanent magnet machines. IEE Proceedings: Electric Power Applications, 151(2), 144-150.
- Analytical modelling of air-gap field in reciprocating moving magnet actuators. Journal of Magnetism and Magnetic Materials, 272-276(1), 1783-1785.
- Design optimization of radially magnetized, iron-cored, tubular permanent-magnet machines and drive systems. IEEE Transactions on Magnetics, 40(5), 3262-3277. View this article in WRRO
- Design and control of a novel spherical permanent magnet actuator with three degrees of freedom. IEEE/ASME Transactions on Mechatronics, 8(4), 457-468.
- Fringing in tubular permanent-magnet machines: Part I. Magnetic field distribution, flux linkage, and thrust force. IEEE Transactions on Magnetics, 39(6), 3507-3516.
- Torque-ripple minimization in modular permanent-magnet brushless machines. IEEE Transactions on Industry Applications, 39(6), 1689-1695. View this article in WRRO
- Fringing in tubular permanent-magnet machines: Part II. Cogging force and its minimization. IEEE Transactions on Magnetics, 39(6), 3517-3522. View this article in WRRO
- Optimal torque control of fault-tolerant permanent magnet brushless machines. IEEE Transactions on Magnetics, 39(5), 2962-2964. View this article in WRRO
- Influence of an aperture on the performance of a two-degree-of-freedom iron-cored spherical permanent-magnet actuator. IEEE Transactions on Magnetics, 38(6), 3650-3653.
- Effect of optimal torque control on rotor loss of fault-tolerant permanent-magnet brushless machines. IEEE Transactions on Magnetics, 38(5), 3291-3293. View this article in WRRO
- A low-power, linear, permanent-magnet generator/energy storage system. IEEE Transactions on Industrial Electronics, 49(3), 640-648. View this article in WRRO
- Design optimisation and comparison of tubular permanent magnet machine topologies. IEE Proceedings: Electric Power Applications, 148(5), 456-464.
- A general framework for the analysis and design of tubular linear permanent magnet machines. IEEE Transactions on Magnetics, 35(3 PART 2), 1986-2000. View this article in WRRO
- Design and experimental characterisation of a linear reciprocating generator. IEE Proceedings: Electric Power Applications, 145(6), 509-518.
- A novel spherical permanent magnet actuator with three degrees-of-freedom. IEEE Transactions on Magnetics, 34(4(1)), 2075-2077.
- Analysis, design and control of a novel spherical permanent-magnet actuator. IEE Proceedings: Electric Power Applications, 145(1), 61-71.
- A novel spherical actuator: Design and control. IEEE Transactions on Magnetics, 33(5), 4209-4211. View this article in WRRO
- Analysis of a spherical permanent magnet actuator. Journal of Applied Physics, 81(8), 4266-4268.
- Co-ordinated control of multiple robotic manipulators handling a common object -- theory and experiments. IEE Proceedings on Control Theory and Applications, 144(1), 73-84.
- Guaranteed rates of convergence of a class of PD controllers for trajectory tracking problems of robotic manipulators with dynamic uncertainties. IEE Proceedings - Control Theory and Applications, 143(2), 186-190.
- Modelling and stability analysis of a permanent-magnet synchronous machine taking into account the effect of cage bars. IEE Proceedings - Electric Power Applications, 142(2), 137-144.
- Determination of thermal convection coefficients of a three phase oil-cooled induction motor. Journal of Shanghai University of Technology, 12(1), 75-82.
- Thermal state analysis of oil-cooled electrical machines. Journal of Small and Medium Size Electrical Machines, 18(6), 98-104.
- Calculation of 3D eddy current problems using a modified T-Ω method. IEEE Transactions on Magnetics, 24(1), 114-117.
- Experimental investigation into thermal state of an oil-cooled induction motor. Journal of Small and Medium Size Electrical Machines, 18(4), 34-43.
- Numerical computation of 3D magnetostatic field problems - an equivalent magnetised region method and its applications in modelling of permanent magnet machines. Transactions of Chinese Electrotechnical Society, 5(3), 67-78.
- Numerical computation of 3D magnetostatic fields in permanent magnet machines using equivalent magnetised region method. Journal of Jiangsu University of Technology, 9(1), 37-42.
- Operation characteristics of the speed control system of wound rotor induction motors with a static inverter. Journal of Jiangsu University of Technology, 7(4), 21-30.
- A theoretical approach to the design of reactance regulators for permanent magnet generators. Journal of Jiangsu University of Technology, 6(2), 65-71.
- A Novel Embedded Sensor for Partial Discharge Detection in Inverter-fed Machines. IEEE Transactions on Industry Applications.
- Mechanically actuated variable flux IPMSM for EV and HEV applications. World Electric Vehicle Journal, 6(3), 684-695.
- Holistic Modeling of High Frequency Behavior of Inverter-fed Machine Winding, Considering Mutual Couplings in Time Domain. IEEE Transactions on Industry Applications.
Chapters
- Design and control of a linear electromagnetic actuator for active vehicle suspension, Advanced Microsystems for Automotive Applications 2010 (pp. 311-323). Berlin Heidelberg: Springer.
Conference proceedings papers
- An Experimental Assessment of the Impact of High dv/dt SiC Converters on Insulation Lifetime of Electrical Machines. 2022 IEEE Energy Conversion Congress and Exposition (ECCE), 9 October 2022 - 13 October 2022.
- Modular design of a three-level SiC MOSFET power module for more-electric aircraft applications. PEMD 2022 The 11th International Conference on Power Electronics, Machines and Drives View this article in WRRO
- Detection Of Partial Discharge Activity In Thermally Aged Sic Inverter Fed Stator Winding Samples And Impact Of Partial Discharges On Their Lifetime. PEMD 2022 The 11th International Conference on Power Electronics, Machines and Drives View this article in WRRO
- Prediction of the Impact of Thermal Cycling on Machine Lifetime Based on Accelerated Life Testing and Finite Element Analysis. IECON 2021 – 47th Annual Conference of the IEEE Industrial Electronics Society, 13 October 2021 - 16 October 2021.
- Smooth and Fast Mode Transition of Synchronous Optimal Modulation for Two-Level Inverter Fed High-Speed PMSM Drives. 2021 IEEE International Electric Machines & Drives Conference (IEMDC), 17 May 2021 - 20 May 2021.
- An Improved Gradient-Based Optimization Algorithm for Synchronous Optimal Modulation of High-Speed PMSM Drives. 2021 IEEE International Electric Machines & Drives Conference (IEMDC), 17 May 2021 - 20 May 2021.
- INTER-TURN FAULT DETECTION APPLIED TO AN AEROSPACE PERMANENT MAGNET ALTERNATOR. The 10th International Conference on Power Electronics, Machines and Drives (PEMD 2020)
- EARLY DETECTION OF TURN-TO-TURN WINDING FAULTS USING A PWM RIPPLE CURRENT BASED METHOD. The 10th International Conference on Power Electronics, Machines and Drives (PEMD 2020)
- FFT PWM RIPPLE CURRENT BASED TURN-FAULT DETECTION APPLIED TO A 9-PHASE PMASRM MACHINE. The 10th International Conference on Power Electronics, Machines and Drives (PEMD 2020)
- Unbalanced Magnetic Pull in a Magnetic Screw. The 10th International Conference on Power Electronics, Machines and Drives (PEMD 2020)
- Online monitoring of ground-wall insulation impedance under cyclic load operation. PEMD 2020
- Towards Lightweight Magnetic Components for Converters with Wide-bandgap Devices. 2020 IEEE 9th International Power Electronics and Motion Control Conference (IPEMC2020-ECCE Asia), 29 November 2020 - 2 December 2020.
- Prediction of Transient Voltage Distribution in Inverter-Fed Stator Winding,
Considering Mutual Couplings in Time Domain. Proceedings of 2020 IEEE Energy Conversion Congress and Exibition ECCE
- Design of Experiments for Stator Windings Insulation Degradation under High dv/dt and
High Switching Frequency. Proceedings of 2020 IEEE Energy Conversion Congress and Exposition (ECCE)
- Challenges of Common Mode Current and Voltage Acquisition for Stator Winding Insulation Health Monitoring. Proceedings of 2020 IEEE Energy Conversion Congress and Exposition (ECCE)
- Electromagnetic-thermal coupled fault analysis of PMASynRM with turn-to-turn short circuit involving a few strands. 2020 IEEE Energy Conversion Congress and Exposition (ECCE), 11 October 2020 - 15 October 2020.
- Design and testing of a high force density linear electromagnetic actuator. 2020 IEEE Energy Conversion Congress and Exposition (ECCE), 11 October 2020 - 15 October 2020.
- Peak Voltage Stress on Stator Winding in PWM Inverter fed Drives. ICEM2020 – International Conference on Electrical Machines
- Full-SiC integrated power module based on planar packaging technology for high efficiency power converters in aircraft applications. CIPS 2020 - 11th International Conference on Integrated Power Electronics Systems. Berlin, Germany, 24 March 2020 - 26 March 2020. View this article in WRRO
- Electromagnetic and thermal behavior of a triple redundant 9-phase PMASynRM with insulation deterioration fault. Proceedings of 2019 IEEE Energy Conversion Congress and Exposition (ECCE) (pp 3053-3060), 29 September 2019 - 3 October 2019. View this article in WRRO
- Pseudo Six-Step Modulation with Optimal Flux Tracking for Control of High-Speed Permanent Magnet Synchronous Machines (PMSMs). Proceedings of 2019 IEEE Energy Conversion Congress and Exposition (ECCE) (pp 313-320). USA, 29 September 2019 - 3 October 2019. View this article in WRRO
- Lifetime of Machines Undergoing Thermal Cycling Stress. 2019 IEEE Energy Conversion Congress and Exposition (ECCE), 29 September 2019 - 3 October 2019.
- On-Line Motor Insulation Capacitance Monitoring Using Low-Cost Sensors. 2019 IEEE Energy Conversion Congress and Exposition (ECCE), 29 September 2019 - 3 October 2019.
- A High Force Density Linear Actuator for Active Suspension. 2019 12th International Symposium on Linear Drives for Industry Applications (LDIA), 1 July 2019 - 3 July 2019. View this article in WRRO
- Performance assessment of triple redundant 9-phase delta and wye connected Permanent Magnet-assisted Synchronous Reluctance Motor under healthy and fault conditions. The Journal of Engineering, Vol. 2019(17) (pp 3563-3567). Liverpool, UK, 17 April 2018 - 19 April 2018. View this article in WRRO
- Detection and classification of Turn Fault and High Resistance Connection Fault in Inverter-fed Permanent Magnet Machines based on High Frequency Signals. Journal of Engineering, Vol. 2019(17) (pp 4278-4282), 17 April 2018 - 19 April 2018. View this article in WRRO
- Modelling framework for parallel SiC power MOSFETs chips in modules developed by planar technology. 2018 IEEE International Conference on Electrical Systems for Aircraft, Railway, Ship Propulsion and Road Vehicles & International Transportation Electrification Conference (ESARS-ITEC), 7 November 2018 - 9 November 2018. View this article in WRRO
- Thermal Management System for a thermally controlled food delivery electric vehicle integrating heat pump, cold storage unit, solar panels and PCT resistors. Proceedings of the Transport Research Arena 2018 View this article in WRRO
- EM-Thermal Coupled Simulation Under Various Fault Conditions of a Triple Redundant 9-Phase PMASynRM. 2018 IEEE Energy Conversion Congress and Exposition (ECCE), 23 September 2018 - 27 September 2018.
- Lumped-Parameter and 3D Thermal Model of a PMASynRM Under Fault Conditions with Asymmetric Temperature Distribution. 2018 IEEE Energy Conversion Congress and Exposition (ECCE), 23 September 2018 - 27 September 2018.
- Computationally efficient, electro-thermally coupled model for
permanent magnet machines in electric vehicle traction applications. applications," 2017 SAE Thermal Management Systems Symposium (TMSS), 10-12 Oct 2017. View this article in WRRO
- Comparative Study on Thermal Management Schemes with Waste Heat Recovery from Electric Vehicle Power Train. 2017 SAE Thermal Management Systems Symposium (TMSS), 10-12 Oct 2017. View this article in WRRO
- PWM ripple currents based turn fault detection for 3-phase permanent magnet machines. 2017 IEEE International Electric Machines and Drives Conference (IEMDC), 21 May 2017 - 24 May 2017.
- Turn fault detection for surface-mounted permanent magnet synchronous machine based on current residual. 2017 IEEE International Electric Machines and Drives Conference (IEMDC), 21 May 2017 - 24 May 2017.
- Prediction of 3D eddy current loss in retaining sleeve of surface mounted permanent magnet machines. 2017 IEEE International Electric Machines and Drives Conference (IEMDC), 21 May 2017 - 24 May 2017.
- Active thermal management for Interior Permanent Magnet Synchronous Machine (IPMSM) drives. 2017 IEEE International Electric Machines and Drives Conference (IEMDC), 21 May 2017 - 24 May 2017.
- A fault tolerant machine drive based on permanent magnet assisted synchronous reluctance machine. Energy Conversion Congress and Exposition (ECCE), 2016 IEEE View this article in WRRO
- Permanent magnet generator turn fault detection using Kalman filter technique. 2016 IEEE Energy Conversion Congress and Exposition (ECCE), 18 September 2016 - 22 September 2016.
- Computationally efficient 3D rotor eddy current loss prediction in permanent magnet machines. 2016 XXII International Conference on Electrical Machines (ICEM), 4 September 2016 - 7 September 2016.
- Stator flux oriented control for high performance interior permanent magnet synchronous machine drives. 8th IET International Conference on Power Electronics, Machines and Drives (PEMD 2016)
- Suppression of harmonic distortions in second order generalised integrator based PLLs for grid connected converters. 8th IET International Conference on Power Electronics, Machines and Drives (PEMD 2016)
- A linear combination of current and voltage based flux observers for direct torque controlled IPM drives. 8th IET International Conference on Power Electronics, Machines and Drives (PEMD 2016)
- 3D Analytical Slotting-Effect Model for Magnet Loss Prediction in SPM Machines. 8th IET International Conference on Power Electronics, Machines and Drives (PEMD 2016)
- A CLLC Resonant Converter Based Bidirectional EV Charger with Maximum Efficiency Tracking. 8th IET International Conference on Power Electronics, Machines and Drives (PEMD 2016)
- Self-learning MTPA control of interior permanent magnet synchronous machine drives based on virtual signal injection. 2015 IEEE International Electric Machines & Drives Conference (IEMDC), 10 May 2015 - 13 May 2015.
- A computationally efficient multi-physics optimization technique for permanent magnet machines in electric vehicle traction applications. 2015 IEEE International Electric Machines & Drives Conference (IEMDC), 10 May 2015 - 13 May 2015.
- Reliability assessment of fault tolerant permanent magnet AC drives. IECON 2015 - 41st Annual Conference of the IEEE Industrial Electronics Society, 9 November 2015 - 12 November 2015.
- Rotor position estimation of a Pseudo Direct Drive PM machine using extended Kalman filter. 2015 IEEE Energy Conversion Congress and Exposition (ECCE), 20 September 2015 - 24 September 2015.
- PWM harmonic signature based islanding detection for a single-phase inverter with PWM frequency hopping. 2015 IEEE Energy Conversion Congress and Exposition (ECCE), 20 September 2015 - 24 September 2015.
- Current ripple reduction in 4kW LLC resonant converter based battery charger for electric vehicles. 2015 IEEE Energy Conversion Congress and Exposition (ECCE), 20 September 2015 - 24 September 2015.
- Fractional-slot Tubular Permanent Magnet Machines with Low Space Harmonics. Proceedings of The 10th International Symposium on Linear Drives for Industry Applications (LDIA 2015), Vol. 1(1). Aachen, Germany, 27 July 2015 - 29 July 2015.
- Comparison of Multi-tooth flux-switching linear permanent magnet motors with different magnet polarity and module displacement. Proceedings of The 10th International Symposium on Linear Drives for Industry Applications (LDIA 2015), Vol. 1(1). Aachen, Germany, 27 July 2015 - 29 July 2015.
- On-line monitoring of winding insulation health using high frequency common mode voltage from PWM. 2015 IEEE International Electric Machines & Drives Conference (IEMDC), 10 May 2015 - 13 May 2015.
- Overall assessments of dual inverter open winding drives. 2015 IEEE International Electric Machines & Drives Conference (IEMDC), 10 May 2015 - 13 May 2015.
- Design and analysis of a flux-switching permanent magnet linear machine with high thrust density. 2015 IEEE Magnetics Conference (INTERMAG), 11 May 2015 - 15 May 2015.
- Design and analysis of a new halbach magnetized magnetic screw for artificial hearts. 2015 IEEE Magnetics Conference (INTERMAG), 11 May 2015 - 15 May 2015.
- 3D effects of rotor step-skews in permanent magnet assisted synchronous reluctance machines. 2015 IEEE Magnetics Conference (INTERMAG), 11 May 2015 - 15 May 2015.
- 3D analytical slotting-effect model for predicting magnet eddy current loss in surface mounted PM machines. 2015 IEEE Magnetics Conference (INTERMAG), 11 May 2015 - 15 May 2015.
- Effects of laser cut on the performance of permanent magnet assisted synchronous reluctance machines. 2015 IEEE Magnetics Conference (INTERMAG), 11 May 2015 - 15 May 2015.
- Reduced Dysprosium permanent magnets and their applications in electric vehicle traction motors. 2015 IEEE Magnetics Conference (INTERMAG), 11 May 2015 - 15 May 2015.
- Unbalanced magnetic pull in permanent magnet machines. 7th IET International Conference on Power Electronics, Machines and Drives, PEMD 2014
- A fast detection technique for stator inter-turn fault in multi-phase permanent magnet machines using model based approach. 7th IET International Conference on Power Electronics, Machines and Drives, PEMD 2014
- Demagnetization assessment of 6-phase fractional-slot permanent magnet machines with low space harmonics under various fault conditions. IET Conference Publications, Vol. 2014(628 CP)
- Reluctance torque evaluation for interior permanent magnet machines using frozen permeability. IET Conference Publications, Vol. 2014(628 CP)
- Unbalanced magnetic pull in permanent magnet machines. IET Conference Publications, Vol. 2014(628 CP)
- Design optimisation and performance evaluation of a rare-earth-free permanent magnet assisted synchronous reluctance machine for electric vehicle traction. IET Conference Publications, Vol. 2014(628 CP)
- Thermal design and analysis of 6-phase fractional slot permanent magnet machines considering driving cycles. IET Conference Publications, Vol. 2014(628 CP)
- A fast detection technique for stator inter-turn fault in multiphase permanent magnet machines using model based approach. IET Conference Publications, Vol. 2014(628 CP)
- Stator inter-turn fault detection in SPM machines using PWM ripple current measurement. IET Conference Publications, Vol. 2014(628 CP)
- Optimal power split ratio of a distributed electric vehicle traction system. IET Conference Publications, Vol. 2014(628 CP)
- Online feedback-based field weakening control of interior permanent magnet brushless AC drives for traction applications accounting for nonlinear inverter characteristics. IET Conference Publications, Vol. 2014(628 CP)
- Mechanically actuated variable flux IPMSM for EV and HEV applications. 2013 World Electric Vehicle Symposium and Exhibition (EVS27), 17 November 2013 - 20 November 2013.
- Assessment of 12-slot, 14-pole permanent magnet flux switching machine with hybrid excitation for electric vehicle application. Energy Conversion Congress and Exposition (ECCE), 2013 IEEE (pp 5092-5099). Denver, CO, USA, 15 September 2013 - 19 September 2013.
- A robust state-of-function battery modelling technique for Li-ion battery chemistries developed for EV/HEV vehicles. PCIM Asia 2013, Power Electronics, Intelligent Motion, Renewable Energy and Energy Management. Shanghai, China, 17 June 2013 - 19 June 2013.
- A comparative study of on-board bidirectional chargers for electric vehicles to support vehicle-to-grid power transfer. Proceedings of the International Conference on Power Electronics and Drive Systems (pp 639-644)
- Analysis and design of 6-phase fractional slot per pole per phase permanent magnet machines with low space harmonics. Proceedings of the 2013 IEEE International Electric Machines and Drives Conference, IEMDC 2013 (pp 386-393)
- Transformer optimisation of the integrated AC/DC-DC/AC bidirectional converter for Vehicle to Grid interfacing. PCIM Europe Conference Proceedings (pp 428-437)
- Slip recovery and prevention in pseudo direct drive permanent magnet machines. Proceedings of the IEEE Energy Conversion Congress and Expo, 15 September 2013 - 19 September 2013.
- Assessment of 12-slot, 14-pole permanent magnet flux switching machine with hybrid excitation for electric vehicle application. Proceedings of the IEEE Energy Conversion Congress and Expo. Denver, USA, 15 September 2013 - 19 September 2013.
- A detailed transient model of interior permanent magnet motor accounting for saturation under stator turn fault. Proceedings of the IEEE Energy Conversion Congress and Expo. Denver, USA, 15 September 2013 - 19 September 2013.
- Analytical modelling of stator turn fault in surface mounted permanent magnet machines. Proceedings of IEEE Energy Conversion Congress and Expo. Denver, USA, 15 September 2013 - 19 September 2013.
- Analysis and evaluation of cogging force minimization techniques in fractional-slot permanent magnet linear motors. Proceedings of the 9th International Symposium on Linear Drives for Industry Applications. Hangzhou, China, 7 July 2013 - 9 July 2013.
- Design considerations of permanent magnet linear machines for force ripple minimization. Proceedings of the 9th International Symposium on Linear Drives for Industry Applications. Hangzhou, China, 7 July 2013 - 9 July 2013.
- Analysis and design optimization of linear electromagnetic actuators for active control of human-induced floor vibrations. Proceedings of the 9th International Symposium on Linear Drives for Industry Applications. Hangzhou, China, 7 July 2013 - 9 July 2013.
- Permanent magnet assisted synchronous reluctance machine with fractional-slot winding configurations. Proceedings of the 2013 IEEE International Electric Machines and Drives Conference, IEMDC 2013 (pp 374-381)
- Optimizations of a permanent magnet machine targeting different driving cycles for electric vehicles. 2013 International Electric Machines & Drives Conference, 12 May 2013 - 15 May 2013.
- Stability analysis of a current source rectifier based drive for aerospace applications. Proceedings of the 2013 IEEE International Electric Machines and Drives Conference, IEMDC 2013 (pp 911-918)
- Speed control for a pseudo direct drive permanent magnet machine with one position sensor on low-speed rotor. Proceedings of the 2013 IEEE International Electric Machines and Drives Conference, IEMDC 2013 (pp 986-992)
- A new loss minimization algorithm for interior permanent magnet synchronous machine drives. Proceedings of the 2013 IEEE International Electric Machines and Drives Conference, IEMDC 2013 (pp 526-533)
- Feed-forward torque control of interior permanent magnet brushless AC drive for traction applications. Proceedings of the 2013 IEEE International Electric Machines and Drives Conference, IEMDC 2013 (pp 152-159) View this article in WRRO
- Experimental validation of a new switching technique for DC-link capacitor minimization in switched reluctance machine drives. Proceedings of the 2013 IEEE International Electric Machines and Drives Conference, IEMDC 2013 (pp 1031-1036)
- Stability and performance analysis of permanent magnet motors operating in flux-weakening region. Proceedings of The 7th International Power Electronics and Motion Control Conference, 2 June 2012 - 5 June 2012.
- WIDE-MOB: an efficient and safe multi-use urban electrical vehicle. Proceedings of the Transport Research Arena. Athens, Greece
- Experimental validation of a new switching technique for DC-link capacitor minimisation in switched reluctance machine drives. 6th IET Power Electronics, Machines and Drives Conference. Bristol, UK
- A rotor with axially and circumferentially magnetised permanent magnets. Proceedings of the IEEE International Magnetics Conference. Vancover, Canada, 7 May 2012 - 11 May 2012.
- Analysis and design of a high force density linear electromagnetic actuator. PCIM Europe Conference Proceedings (pp 177-185)
- A computationally efficient design technique for electric vehicle traction machines. Proceedings - 2012 20th International Conference on Electrical Machines, ICEM 2012 (pp 2596-2602)
- A linear magnetic gear. Proceedings - 2012 20th International Conference on Electrical Machines, ICEM 2012 (pp 563-569)
- Design optimization of high frequency transformer for dual active bridge DC-DC converter. Proceedings - 2012 20th International Conference on Electrical Machines, ICEM 2012 (pp 2311-2317) View this article in WRRO
- Design optimisation of permanent magnet assisted synchronous reluctance machines for electric vehicle applications. Proceedings - 2012 20th International Conference on Electrical Machines, ICEM 2012 (pp 2647-2653)
- Observer based state feedback controller design for Pseudo Direct Drive® using genetic algorithm. IET Conference Publications(592 CP)
- Torque distribution strategy for a front and rear wheel driven electric vehicle. IET Conference Publications(592 CP)
- Tidal stream power collection - passive rectification to a common DC-bus. IET Conference Publications(592 CP)
- EV/HEV Li-ion battery modelling and state-of-function determination. SPEEDAM 2012 - 21st International Symposium on Power Electronics, Electrical Drives, Automation and Motion (pp 353-358)
- A complex frequency domain analysis of a closed loop controlled pseudo direct drive. Proceedings - 2012 20th International Conference on Electrical Machines, ICEM 2012 (pp 2428-2434)
- Design and operation of a magnetic Continuously Variable Transmission. 2011 IEEE International Electric Machines & Drives Conference (IEMDC), 15 May 2011 - 18 May 2011.
- Design and realisation of a linear magnetic gear. Proceedings of the IEEE International Magnetics Conference. Taipei, China, 25 April 2011 - 29 April 2011.
- Analysis of a magnetic screw for high force density linear electromagnetic actuators. Proceedings of the IEEE International Magnetics Conference. Taipei, China, 25 April 2011 - 29 April 2011.
- A brushless permanent magnet machine with integrated differential. Proceedings of the IEEE International Magnetics Conference. Taipei, China, 25 April 2011 - 29 April 2011.
- Effects of rotor eccentricity on the unbalanced magnetic pull in permanent magnet machines. Proceedings of the IEEE International Magnetics Conference. Taipei, China, 25 April 2011 - 29 April 2011.
- A magnetic continuously variable transmission device. Proceedings of the IEEE International Magnetics Conference. Taipei, China, 25 April 2011 - 29 April 2011.
- A novel high force density linear electromagnetic actuator. Proceedings of the 8th International Symposium on Linear Drives for Industry Applications. Eindhoven, Netherland, 3 June 2011 - 5 June 2011.
- Design of a single-phase, flux-switching, tubular permanent magnet machine for refrigerator applications. Proceedings of the 8th International Symposium on Linear Drives for Industry Applications. Eindhoven, Netherland, 3 June 2011 - 5 June 2011.
- Testing and experimental characterization of a linear permanent magnet actuator for active vehicle suspension. 2011 International Conference on Electrical Machines and Systems, ICEMS 2011
- Stability analysis of "more electric" aircraft hybrid electrical power systems. 2011 International Conference on Electrical Machines and Systems, ICEMS 2011
- Influence of control bandwidth on stability of permanent magnet brushless motor drive for "more electric" aircraft systems. 2011 International Conference on Electrical Machines and Systems, ICEMS 2011
- Mechanically adjusted variable-flux concept for switched-flux permanent-magnet machines. 2011 International Conference on Electrical Machines and Systems, ICEMS 2011
- Review of variable-flux permanent magnet machines. 2011 International Conference on Electrical Machines and Systems, ICEMS 2011
- Stability analysis of a DC/DC boost converter fed permanent magnet brushless motor drive. 2011 IEEE International Electric Machines and Drives Conference, IEMDC 2011 (pp 854-859)
- Design and operation of a magnetic continuously variable transmission. IEEE International Electric Machines and Drives Conference, IEMDC 2011 (pp 312-317)
- Practical control and bench testing of a linear electromagnetic actuation system for active vehicle suspension. International Symposium on Advanced Vehicle Control. Loughborough, UK
- Prediction and measurement of iron loss in a short-stroke, single-phase, tubular permanent magnet machine. Proceedings of the 11th Joint Conference on Magnetism & Magnetic Materials and International Magnetics. Washington DC, USA, 18 January 2010 - 22 January 2010.
- A new switching technique for DC-link capacitor minimisation in switched reluctance machine drives. IET Conference Publications(563 CP)
- Design optimization of passive DC filters for aerospace applications. IET Conference Publications(563 CP)
- Kalman filter based sensorless control of a tubular permanent magnet machine for active vehicle suspension. IET Conference Publications(563 CP)
- A linear electromagnetic actuation system for active vehicle suspensions. Proceedings of the 7th International Symposium on Linear Drives and Industrial Applications (pp 304-307). Incheon, Korea, 19 September 2009 - 21 September 2009.
- Analytical prediction of iron loss in a short-stroke, single-phase, tubular permanent magnet machine. Proceedings of the 7th International Symposium on Linear Drives and Industrial Applications (pp 314-317). Incheon, Korea, 19 September 2009 - 21 September 2009.
- Recent advances in electrical drives for electrical and hybrid vehicles. Proceedings of the 3rd International Conference on Smart Systems Integration. Brussels, Belgium, 10 March 2009 - 11 March 2009.
- Influence of filter parameters/topologies on stability of matrix converter-fed permanent magnet brushless motor drive systems. 2009 IEEE International Electric Machines and Drives Conference, IEMDC '09 (pp 964-970)
- A components library for simulation and analysis of aircraft electrical power systems using Modelica. 2009 13th European Conference on Power Electronics and Applications, EPE '09
- Stability assessment of electric power systems for 'more electric' aircraft. 2009 13th European Conference on Power Electronics and Applications, EPE '09 View this article in WRRO
- State-space average modelling of synchronous generator fed 18-pulse diode rectifier. 2009 13th European Conference on Power Electronics and Applications, EPE '09
- Stability of matrix converter-fed permanent magnet brushless motor drive systems. 2009 13th European Conference on Power Electronics and Applications, EPE '09
- Computationally efficient approaches for evaluation of rotor eddy current loss in permanent magnet brushless machines. Proceedings - The 12th International Conference on Electrical Machines and Systems, ICEMS 2009
- Modeling and control of 'pseudo' direct-drive brushless permanent magnet machines. 2009 IEEE International Electric Machines and Drives Conference, IEMDC '09 (pp 870-875)
- Design of a linear permanent magnet motor for active vehicle suspension. 2009 IEEE International Electric Machines and Drives Conference, IEMDC '09 (pp 585-591)
- Design optimization of short-stroke, single phase tubular permanent magnet motor for refrigeration applications. Proceedings of the 2008 International Conference on Electrical Machines, ICEM'08
- Stability assessment of AC hybrid power systems for 'more electric' aircraft. Proceedings of the IEEE Vehicle Power and Propulsion Conference. Harbin, China
- State-space average modelling of 18-pulse diode rectifier. 3rd International Conference on From Scientific Computing to Computational Engineering. Athens, Greece, 9 July 2008 - 12 July 2008.
- Design considerations of tubular flux-switching permanent magnet machines. Proceedings of the IEEE International Magnetics Conference. Madrid, Spain, 3 May 2008 - 7 May 2008.
- Analysis and experimental verification of a single phase, quasi-Halbach magnetised tubular permanent magnet motor with non-ferromagnetic supporting tube. Proceedings of the IEEE International Magnetics Conference. Madrid, Spain, 3 May 2008 - 7 May 2008.
- Stability analysis of electric power systems for 'more electric' aircraft. 3rd International Conference on From Scientific Computing to Computational Engineering. Athens, Greece, 9 July 2008 - 12 July 2008.
- Design and control of a linear electromagnetic actuation system for active vehicle suspensions. Proceedings of the International Symposium on Advanced Vehicle Control. Kobe, Japan
- Innovative designs of REPM machines. International Workshop on Rare-Earth Permanent Magnets and their Applications. Hersonissos, Crete, 8 September 2008 - 10 September 2008.
- Analytical prediction of inter-turn short-circuit current in fault-tolerant permanent magnet brushless machines. IET Conference Publications(538 CP) (pp 1-5)
- Stability assessment of distributed DC power systems for 'more- electric' aircraft. IET Conference Publications(538 CP) (pp 661-665)
- Analysis of a single phase, quasi-Halbach magnetised tubular permanent magnet motor with non-ferromagnetic supporting tube. IET Conference Publications(538 CP) (pp 762-766)
- Stability assessment of AC hybrid power systems for 'more electric' aircraft. 2008 IEEE Vehicle Power and Propulsion Conference, VPPC 2008
- Large signal stability analysis of DC power systems with constant power loads. 2008 IEEE Vehicle Power and Propulsion Conference, VPPC 2008
- Comparative studies of linear permanent magnet motor topologies for active vehicle suspension. 2008 IEEE Vehicle Power and Propulsion Conference, VPPC 2008
- Analysis of switching loss of an AC fed direct converter for a switched reluctance machine. Proceedings of the 2008 International Conference on Electrical Machines, ICEM'08
- Enhanced optimal torque control of fault-tolerant PM machine under flux weakening operation. Proceedings of the 2008 International Conference on Electrical Machines, ICEM'08
- Experimental testing of a 250kW fault-tolerant permanent magnet power generation system for large civil aero-engines. Proceedings of the 5th International Energy Conversion Engineering Conference. St Louis, Missouri, USA
- Analytical prediction of eddy current loss in ring magnets and support tube of tubular permanent magnet machines. Proceedings of the 7th International Symposium on Linear Drives for Industry Applications. Lille, France
- Analysis of a short-stroke, single-phase tubular permanent magnet actuator for reciprocating compressors. Proceedings of the 7th International Symposium on Linear Drives for Industrial Applications. Lille, France
- A tubular flux-switching permanent magnet machine. 52nd Annual Conference on Magnetism and Magnetic Materials. Tampa, Florida, USA
- State-space average modelling of 6- and 12-pulse diode rectifiers. 2007 European Conference on Power Electronics and Applications, EPE View this article in WRRO
- A hybrid current controller for linear reciprocating vapor compressors. Conference Record - IAS Annual Meeting (IEEE Industry Applications Society) (pp 274-280)
- Comparative study of winding configurations of short-stroke, single phase tubular permanent magnet motor for refrigeration applications. Conference Record - IAS Annual Meeting (IEEE Industry Applications Society) (pp 311-318)
- A resonant frequency tracking technique for linear vapor compressors. Proceedings of IEEE International Electric Machines and Drives Conference, IEMDC 2007, Vol. 1 (pp 370-375)
- Experimental testing of a 250 kW fault-tolerant permanent magnet power generation system for large civil aero-engines. Collection of Technical Papers - 5th International Energy Conversion Engineering Conference, Vol. 2 (pp 1076-1083)
- Comparative studies on linear motor topologies for reciprocating vapor compressors. Proceedings of IEEE International Electric Machines and Drives Conference, IEMDC 2007, Vol. 1 (pp 364-369)
- Performance comparison and winding fault detection of duplex 2-phase and 3-phase fault-tolerant permanent magnet brushless machines. Conference Record - IAS Annual Meeting (IEEE Industry Applications Society) (pp 566-572)
- A novel power shaping stabilising control strategy for dc power systems with constant power loads. VPPC 2007 - Proceedings of the 2007 IEEE Vehicle Power and Propulsion Conference (pp 20-25)
- Input admittance characteristics of permanent magnet brushless AC motor drive systems. VPPC 2007 - Proceedings of the 2007 IEEE Vehicle Power and Propulsion Conference (pp 191-196)
- Electrical torque boosting of down-sized ICE vehicles. EPE-PEMC 2006: 12th International Power Electronics and Motion Control Conference, Proceedings (pp 1796-1800)
- Analysis of an AC fed direct converter for a switched reluctance machine in aerospace applications. Conference Proceedings - IPEMC 2006: CES/IEEE 5th International Power Electronics and Motion Control Conference, Vol. 2 (pp 977-982)
- Analysis of an AC fed direct converter for a switched reluctance machine in aerospace applications. 2006 CES/IEEE 5th International Power Electronics and Motion Control Conference, 14 August 2006 - 16 August 2006.
- Electrical Torque Boosting of Down-Sized ICE Vehicles. 2006 12th International Power Electronics and Motion Control Conference, 30 August 2006 - 1 September 2006.
- Evaluation of stator iron loss in tubular permanent magnet machines by three-dimensional finite element analysis. Proceedings of the IET Power Electronics, Machines and Drives Conference. Dublin, Ireland, 4 April 2006 - 6 April 2006.
- Small-signal stability studies of a 270V DC more-electric aircraft power system. Proceedings of the IET Power Electronics, Machines and Drives Conference. Dublin, Ireland, 4 April 2006 - 6 April 2006.
- Evaluation of eddy current loss in tubular permanent magnet motors by three-dimensional finite element analysis. Proceedings of XVII International Conference on Electrical Machines. Chania, Greece, 2 September 2006 - 5 September 2006.
- Comparative study of 3-phase brushless permanent magnet machines with concentrated, distributed and modular windings. Proceedings of the IET Power Electronics, Machines and Drives Conference (pp 489-493). Dublin, Ireland, 4 April 2006 - 6 April 2006.
- Comparison of vibration characteristics of 3-phase permanent magnet machines with concentrated, distributed and modular windings. Proceedings of XVII International Conference on Electrical Machines. Chania, Greece, 2 September 2006 - 5 September 2006.
- Small-signal stability studies of 270V DC power system for more electric aircraft employing switched reluctance generator technology. ICAS-Secretariat - 25th Congress of the International Council of the Aeronautical Sciences 2006, Vol. 6 (pp 3444-3451)
- Current ripple minimisation in switched reluctance (SR) machines for aerospace applications. INTERMAG 2006 - IEEE International Magnetics Conference (pp 768)
- Vibration characteristics of modular permanent magnet brushless AC machines. Conference Record - IAS Annual Meeting (IEEE Industry Applications Society), Vol. 3 (pp 1501-1506)
- Experimental characterisation of a super-capacitor based electrical torque boost system for down-sized ICE vehicles. 2006 IEEE Vehicle Power and Propulsion Conference, VPPC 2006
- Modular 3-phase permanent magnet brushless machines for in-wheel applications. 2006 IEEE Vehicle Power and Propulsion Conference, VPPC 2006
- Advanced electrical machine and actuation systems for environmentally friendlier vehicles. IEEE Vehicle Power and Propulsion Conference. Illinois, USA
- Design of a modular tubular permanent magnet generator for a free-piston energy converter. Proceedings of Linear Drives for Industry Applications Conference. Hyogo, Japan
- A novel high performance linear magnetic gear. Proceedings of Linear Drives for Industry Applications Conference
- Three-dimensional analysis of tubular permanent magnet machines. 50th Annual Conference on Magnetism and Magnetic Materials. San Jose, California, USA
- A tubular magnet machine equipped with homopolar windings. Proceedings of Linear Drives for Industry Applications Conference. Hyogo, Japan
- Emergency breaking for free piston energy converters. 2005 European Conference on Power Electronics and Applications
- A linear permanent magnet generator for a free-piston energy converter. 2005 IEEE International Conference on Electric Machines and Drives (pp 1521-1528)
- Influence of soft magnetic materials on the design and performance of tubular permanent magnet machines. INTERMAG ASIA 2005: Digests of the IEEE International Magnetics Conference (pp 407)
- Minimisation of cogging force in linear permanent magnet machines. Proceedings of High Performance Magnets and their Applications Conference. Annecy, France
- Rotor eddy current loss in permanent magnet brushless machines. Proceedings of the Joint Magnetism & Magnetic Materials and International Magnetics Conference. California, USA
- Three-phase interior mounted magnet modular brushless machines for automotive applications. Proceedings of the International Conference on Electrical Machines. Cracow, Poland
- Comparison of iron loss in different permanent magnet brushless machine topologies. Proceedings of High Performance Magnets and their Applications Conference. Annecy, France
- Real-time optimal torque control of fault-tolerant permanent magnet brushless machines. Proceedings of the 49th Magnetic Materials and Magnetism Conference. Jacksonville, USA
- Eddy current loss in tubular modular permanent magnet machines. Proceedings of the International Conference on Electrical Machines. Cracow, Poland
- Armature reaction field and inductances of tubular modular permanent magnet machines. Proceedings of the 49th Magnetic Materials and Magnetism Conference. Jacksonville, USA
- A high performance linear magnetic gear. Proceedings of the 49th Magnetic Materials and Magnetism Conference. Jacksonville, USA
- Analysis of three-phase surface-mounted magnet modular permanent magnet machines. IEE Conference Publication, Vol. 3 (pp 27-32)
- Supercapacitor-based torque booster for down-sized ICE vehicle. IEE Conference Publication, Vol. 1 (pp 55-60)
- Stator iron loss of tubular permanent magnet machines. Conference Record - IAS Annual Meeting (IEEE Industry Applications Society), Vol. 3 (pp 2119-2124)
- Effect of axial segmentation of permanent magnets on rotor loss of modular brushless machines. Conference Record - IAS Annual Meeting (IEEE Industry Applications Society), Vol. 3 (pp 1703-1708)
- Torque ripple minimisation in modular permanent magnet brushless machines. Proceedings of the IEEE International Electric Machines and Drives Conference. Madison, USA
- Magnetic field distribution of quasi-Halbach magnetised cylinder for tubular permanent magnet machines. Proceedings of the Conference on Linear Drives for Industrial Applications. Birmingham, UK
- Influence of slot openings in tubular modular permanent magnet machines. Proceedings of the Conference on Linear Drives for Industrial Applications. Birmingham, UK
- Analytical modelling of air-gap field in reciprocating moving-magnet actuators. Proceedings of the International Conference on Microelectronics. Rome, Italy, 27 July 2003 - 1 August 2003.
- Armature reaction field of axially magnetised, iron-cored, tubular permanent magnet machines. Proceedings of the Conference on Linear Drives for Industrial Applications. Birmingham, UK
- Effect of optimal torque control on rotor loss of fault tolerant permanent magnet brushless machines. INTERMAG Europe 2002 - IEEE International Magnetics Conference
- Analytical prediction and minimisation of cogging force in tubular permanent magnet machines. International Conference on Electrical Machines. Bruges, Belgium, 25 August 2002 - 28 August 2002.
- Fault-tolerant brushless machines for safety-critical applications. Proceedings of the 17th Rare-Earth Magnets Conference. Newark, Delaware, USA, 18 August 2002 - 22 August 2002.
- Effect of optimal torque control on rotor loss of fault tolerant permanent magnet brushless machines. Digests of the Intermag Conference
- Modular fault-tolerant permanent magnet brushless machines. International Conference on Power Electronics, Machines and Drives(487) (pp 415-420)
- Analysis of rare-earth magnet devices. Rare Earth Magnets and their Applications (pp 86-99)
- An improved axially magnetised tubular permanent magnet machine topology. International Conference on Power Electronics, Machines and Drives(487) (pp 303-308)
- Modelling and control system design of an integrated electric drive train for a flywheel powered ultra light rail bus. 9th European Conference on Power Electronics and Applications. Gratz, Austria
- Multi-degree-of-freedom spherical permanent magnet motors. IEEE International Conference on Robotics and Automation. Seoul, Korea
- Analytical prediction of fringing effect in tubular permanent magnet machines. Proceedings of Linear Drives for Industry Applications Conference. Japan
- Analysis and design of an integrated electric drive train for a flywheel powered ultra-light rail bus. Drive and Control Conference. London, UK
- Analysis and design optimisation of slotless tubular permanent magnet linear motors. Proceedings of the Linear Drives for Industry Applications Conference. Japan
- An integrated electric drive-train for a flywheel powered ultra light rail bus. 35th Universities' Power Engineering Conference. Belfast, UK
- Design optimisation of a miniature multi-pole permanent magnet generator. Proceedings of the 9th International Conference on Electric Machines and Drives. Canterbury, UK, 1 September 1999 - 3 September 1999.
- A novel spherical permanent magnet actuator with three degrees-of-freedom. IEEE Transactions on Magnetics, Vol. 34(4) (pp 2078-2080) View this article in WRRO
- A linear reciprocating generator for telemetry-based monitoring systems. Proceedings of the 2nd International Symposium on Linear Drives for Industry Applications. Tokyo, Japan, 8 April 1998 - 10 April 1998.
- A novel spherical actuator with three degrees-of-freedom. Proceedings of the 7th Joint Magnetism & Magnetic Materials and International Magnetics Conference, 6 January 1998 - 9 January 1998.
- Modelling and control of a novel spherical actuator with three-degrees-of-freedom. Proceedings of the 2nd European Conference on Magnetic Sensors and Actuators. Sheffield, UK, 13 July 1998 - 15 July 1998.
- Miniature linear permanent magnet generators. Proceedings of the 15th International Workshop on Rare-Earth Magnets and their Applications. Dresden, Germany, 30 August 1998 - 3 September 1998.
- Analysis and design of a linear reciprocating generator for telemetry-based vibration monitoring systems. Proceedings of the International Conference on Electrical Machines. Istabul, Turkey, 2 September 1998 - 4 September 1998.
- Spherical actuators with multiple degrees-of-freedom. IEE Colloquium (Digest)(494)
- A novel spherical actuator design and control. IEEE International Magnetics Conference, 1 April 1997 - 4 April 1997.
- Modelling of a novel spherical permanent magnet actuator. Proceedings - IEEE International Conference on Robotics and Automation, Vol. 2 (pp 1190-1195)
- Development of a novel spherical permanent magnet actuator. IEE Colloquium (Digest)(90)
- Analysis of a spherical permanent magnet actuator. 41st Annual Conference on Magnetism and Magnetic Materials, 12 November 1996 - 15 November 1996.
- Non-linear bock control with sliding mode approach applied to robotic manipulators. Proceedings of the IFAC International Symposium on Motion Control. Munich, Germany, 9 October 1995 - 11 October 1995.
- A new approach to the robust co-ordinated control of two robotic manipulators without using force measurements. Proceedings of the 4th IFAC International Symposium on Robot Control. Capri, Italy, 19 September 1994 - 21 September 1994.
- A new sliding mode approach to the robust control of robotic manipulators with dynamic uncertainties. Proceedings of IEEE International Conference on Robotics and Automation. San Diego,California, USA, 10 May 1994 - 12 May 1994.
- A novel sliding mode control strategy for a variable speed permanent magnet drive system. Proceedings of the 5th European Conference on Power Electronics. Brighton, UK, 13 September 1993 - 16 September 1993.
- A new vector control scheme for an adjustable speed AC drive system utilizing a high-field permanent-magnet synchronous machine. 6th International Conference on Electrical Machines and Drives(376) (pp 121-126)
- Computational and experimental-determination of static and dynamic parameters for modeling permanent-magnet synchronous machines. 6th International Conference on Electrical Machines and Drives(376) (pp 289-294)
- A vector control technique for achieving the stable performance of high field permanent magnet synchronous machines. Proceedings of the International Symposium on Power Electronics, Electrical Drives and Advanced Electrical Motors. Positano, Italy, 19 May 1992 - 21 May 1992.
- Numerical analysis of 3D thermal fields in oil-cooled electrical machines. Proceedings of the Beijing International Symposium on Electromagnetic Fields in Electrical Engineering
- Studies on thermal state of oil-cooled electrical machines. Proceedings of the International Conference on Electrical Machines. Italy
- Numerical computation of 3D eddy current problems with modified T-Ω method - taking nonlinearity and hysteresis of ferromagnetic materials into consideration. Proceedings of the Beijing International Symposium on Electromagnetic Fields in Electrical Engineering. Beijing
- Calculation of 3D magnetostatic field problems using equivalent magnetised region method. Proceedings of the Beijing International Symposium on Electrical Machines. Beijing
- Optimal torque control of fault-tolerant permanent magnet brushless machines. Digest of INTERMAG 2003. International Magnetics Conference (Cat. No.03CH37401)
- Torque ripple minimisation in modular permanent magnet brushless machines. IEEE International Electric Machines and Drives Conference, 2003. IEMDC'03.
- Multi-degree-of-freedom spherical permanent magnet motors. Proceedings 2001 ICRA. IEEE International Conference on Robotics and Automation (Cat. No.01CH37164)
- Analysis of a Novel Spherical Permanent Magnet Actuator with Three Degrees-of-Freedom. 7th Joint MMM-Intermag Conference. Abstracts (Cat. No.98CH36275)
Website content
- 6-phase Fault-Tolerant Permanent Magnet Traction Drive for Electric Vehicles. Retrieved from http://www.artemis-ioe.eu/events/presentations/26.09.2013_NESEM_2013_Toulouse_C.Gould_University_of_Sheffield_6-Phase_Fault-tolerant_Permanent_Magnet_Traction_Drive_for_EVs_Final.pdf
- Multiple Current Harmonics Suppression for Low-Inductance PMSM Drives with Deadbeat Predictive Current Control. IEEE Transactions on Industrial Electronics, 1-1.
- Research students
Student Degree Status Primary/Secondary Aorith Hawa K A A PhD Graduated Primary Bouheraoua M PhD Graduated Primary Chen L PhD Graduated Primary Colombage N C K PhD Graduated Primary Han L PhD Graduated Primary Ibrahim T PhD Graduated Primary Koc M PhD Graduated Primary Liu B PhD Graduated Primary Liu C PhD Graduated Primary Nair S S PhD Graduated Primary Patel V I PhD Graduated Primary Sen B PhD Graduated Primary Sun T PhD Graduated Primary Sun Z PhD Graduated Primary Suppharangsan W PhD Graduated Primary Tsyokhla I PhD Graduated Primary Turner A J PhD Graduated Primary Wang Bo PhD Graduated Primary Al-Ani M M J PhD Graduated Secondary Forrest S J PhD Graduated Secondary Leong J H PhD Graduated Secondary Lin T-C PhD Graduated Secondary Liu J PhD Graduated Secondary Mbabazi S PhD Graduated Secondary Rodrigues L K PhD Graduated Secondary Spall S J P PhD Graduated Secondary Wang K PhD Graduated Secondary