Professor Panos Tsakiropoulos
DEng Min Eng-Metallurgy MMet PhD
School of Chemical, Materials and Biological Engineering
Emeritus Professor of Metallurgy
p.tsakiropoulos@sheffield.ac.uk
+44 114 222 5960
+44 114 222 5960
Sir Robert Hadfield Building
Full contact details
Professor Panos Tsakiropoulos
School of Chemical, Materials and Biological Engineering
Sir Robert Hadfield Building
Mappin Street
Sheffield
S1 3JD
School of Chemical, Materials and Biological Engineering
Sir Robert Hadfield Building
Mappin Street
Sheffield
S1 3JD
- Profile
-
Panos Tsakiropoulos studied Mining Engineering and Metallurgy at the National Technical University of Athens, with postgraduate studies and research in the Department of Metallurgy of the University of Sheffield.
He joined the University of Surrey in 1986 as a New Blood Lecturer, was promoted to Reader in 1991 and was appointed to the Chair of Metallurgy of the University in 1996. He returned to Sheffield in 2006.
- Research interests
-
Research interests are in the design and development of ferrous and non-ferrous alloys and composites for the energy, transport and aerospace industries and for biomedical applications via process-microstructure-property studies. Materials processing under equilibrium and non-equilibrium conditions is also researched as part of the alloy development. The emphasis of the research is on establishing (i) the effects of processing on the microstructure and properties of structural engineering materials and (ii) how processing can be tailored to particular engineering requirements for desirable microstructures and properties. Currently, alloys of Fe, Mo, Nb and Zr are under investigation.
- Alloy Development: Intermetallics, Exotics, Nb Alloys, Mo Alloys
- Study of the roles of heterogeneities, in-homogeneities and non-uniformities in materials processing and phase transformations
- Study of Alloying Related Phenomena at the Electronic Level
- Non-Equilibrium Processing of Alloys
Research group
- Dr Claire Utton
- Mr Amir Nanpazi
- Mr Jack Nelson
- Miss Eleftheria Karagianni
- Miss Ofelia Hernandez-Negrete
- Mr Andrew Tweddle
- Mr Gary Bywater
- Miss Zheng Xu
- Mr Boniface Anazodo
- Mr Conor McCaughey
- Mr Ioannis Papadimitriou
- Mrs Monica Balboa Garcia
- Mr Jiang Zhao
- Mr Mohammad Hossein Ghadyani
- Mr Edward Gallagher Project student
- Mr Arthur Resende Visiting academic staff
- Professor Armando Cirilo De Souza
Research centres
Key projects:
- Study of Alloying Behaviour in Intermetallics and Advanced Alloys
- Process-Microstructure-Property Studies in Nb Alloys
- Development of Mo Alloys
- Development of Oxidation Resistant High-Temperature Alloys
- Study of the roles of segregations and inclusions in thermomechanical processing and mechanical properties
- Development of materials for gas turbine technologies for hydrogen-rich syngas combustion
- Publications
-
Journal articles
- Powder production, FAST processing and properties of a Nb-silicide based alloy for high temperature aerospace applications. Journal of Materials Research and Technology, 28, 3217-3224. View this article in WRRO
- Characterization and determination of the gamma radiation attenuation coefficient in the W20Cu3Ni metallic alloy to be applied in the transport of radioactive substances. Journal of Materials Research and Technology.
- The effect of Fe addition in the RM(Nb)IC Alloy Nb–30Ti–10Si–2Al–5Cr–3Fe–5Sn–2Hf (at.%) on its microstructure, complex concentrated and high entropy phases, pest oxidation, strength and contamination with oxygen, and a comparison with other RM(Nb)ICs, refractory complex concentrated alloys (RCCAs) and refractory high entropy alloys (RHEAs). Materials, 15(17).
- Special Issue “Advanced Refractory Alloys” : Metals, MDPI. Metals, 12(2).
- Alloys for application at ultra-high temperatures: Nb-silicide in situ composites. Progress in Materials Science, 123, 100714-100714.
- On the microstructure and properties of Nb-Ti-Cr-Al-B-Si-X (X = Hf, Sn, Ta) refractory complex concentrated alloys. Materials, 14(24). View this article in WRRO
- On the Microstructure and Properties of the Nb-23Ti-5Si-5Al-5Hf-5V-2Cr-2Sn (at.%) Silicide-Based Alloy—RM(Nb)IC. Metals, 11(11).
- The effect of boron on the microstructure and properties of refractory metal intermetallic composites (RM(Nb)ICs) based on Nb-24Ti-xSi (x = 16, 17 or 18 at.%) with additions of Al, Cr or Mo. Materials, 14(20).
- Refractory metal (Nb) intermetallic composites, high entropy alloys, complex concentrated alloys and the alloy design methodology NICE—Mise-en-scène † patterns of thought and progress. Materials, 14(4).
- Microstructural Evolution of the Refractory WCuNi Metallic Alloy. Metals and Materials International, 27(11), 4820-4830.
- On the microstructure and properties of Nb-12Ti-18Si-6Ta-2.5W-1Hf (at.%) silicide-based alloys with Ge and Sn additions. Materials, 13(7). View this article in WRRO
- A study of the effect of 5 at.% Sn on the micro-structure and isothermal oxidation at 800 and 1200 °C of Nb-24Ti-18Si based alloys with Al and/or Cr additions. Materials, 13(1). View this article in WRRO
- Ab initio study of ternary W5Si3 type TM5Sn2X compounds (TM = Nb, Ti and X = Al, Si). Materials, 12(19). View this article in WRRO
- Phase equilibria in the Nb-rich region of Al-Nb-Sn at 900 and 1200 °C. Materials, 12(17). View this article in WRRO
- On the Microstructure and Isothermal Ooxidation of Silica and Alumina Scale Forming Si-23Fe-15Cr-15Ti-1Nb and Si-25Nb-5Al-5Cr-5Ti (at.%) Silicide Alloys. Materials, 12(7). View this article in WRRO
- Microstructural characterization of Zr1Nb alloy after hot rolling. International Journal of Refractory Metals and Hard Materials, 80, 216-224.
- Microstructures and isothermal oxidation of the alumina scale forming Nb1.45Si2.7Ti2.25Al3.25Hf0.35 and Nb1.35Si2.3Ti2.3Al3.7Hf0.35 alloys. Materials, 12(5). View this article in WRRO
- Microstructures and Isothermal Oxidation of the Alumina Scale Forming Nb1.7Si2.4Ti2.4Al3Hf0.5 and Nb1.3Si2.4Ti2.4Al3.5Hf0.4 Alloys. Materials, 12(2). View this article in WRRO
- A study of the effects of Hf and Sn on the microstructure, hardness and oxidation of Nb-18Si silicide based alloys without Ti addition. Materials, 11(12). View this article in WRRO
- A study of the effect of 2 at.% Sn on the microstructure and isothermal oxidation at 800 and 1200 °C of Nb-24Ti-18Si-based alloys with Al and/or Cr additions. Materials, 11(10). View this article in WRRO
- A study of the effects of Al, Cr, Hf, and Ti additions on the microstructure and oxidation of Nb-24Ti-18Si silicide based alloys. Materials, 11(9). View this article in WRRO
- Microstructural Study of a Bond Coat Type Al-Rich Intermetallic Alloy for Nb-Silicide Based Alloys for High Temperature Structural Applications. Microscopy and Microanalysis, 24(S1), 2258-2259.
- On Nb silicide based alloys: Part II. Journal of Alloys and Compounds, 748, 569-576. View this article in WRRO
- On Nb silicide based alloys: Alloy design and selection. Materials, 11(5). View this article in WRRO
- Experimental and thermodynamic assessment of the Ge-Nb-Si ternary phase diagram. Journal of Alloys and Compounds, 717, 303-316. View this article in WRRO
- The impact of Ti and temperature on the stability of Nb 5 Si 3 phases: a first-principles study. Science and Technology of Advanced Materials, 18(1), 467-479. View this article in WRRO
- On the Nb silicide based alloys: Part I – The bcc Nb solid solution. Journal of Alloys and Compounds, 708, 961-971. View this article in WRRO
- Quantitative Characterization of Inclusions in Continuously Cast High-Carbon Steel. Metallurgical and Materials Transactions B, 46(6), 2490-2502. View this article in WRRO
- On the Nb-Ge Binary System. Metallurgical and Materials Transactions A, 46(12), 5526-5536.
- Ab initio investigation of the Nb–Al system. Computational Materials Science, 107, 116-121.
- Novel protocol for creation and study of abdominal aortic aneurysm with porcine pancreatic elastase infusion in rats. Archives of Hellenic Medicine, 32(5), 636-644.
- Microstructural evolution of a heat-treated H23 tool steel. International Journal of Minerals, Metallurgy, and Materials, 22(3), 272-284.
- Ab initio investigation of the intermetallics in the Nb–Sn binary system. Acta Materialia, 86, 23-33.
- Controlled impact testing of woven fabric composites with and without reinforcing shape-memory alloy wires. Journal of Composite Materials, 48(30), 3799-3813.
- Ab initio study of the intermetallics in Nb-Si binary system. Intermetallics, 54, 125-132.
- Effect of early stages of thermomechanical processing on inclusions in high carbon steel. Materials Science and Technology (United Kingdom), 30(10), 1177-1188. View this article in WRRO
- Ab Initio Study of Binary and Ternary Nb3(X,Y) A15 Intermetallic Phases (X,Y = Al, Ge, Si, Sn). Metallurgical and Materials Transactions A.
- On the Solidification of a H23 Tool Steel. Transactions of the Indian Institute of Metals.
- On the macrosegregation of silicon in niobium silicide based alloys. Intermetallics, 55, 95-101.
- A Study of Carbide Precipitation in a H21 Tool Steel. ISIJ International, 54(7), 1667-1676.
- The microstructures of Nb-18Si-5Ge-5Al and Nb-24Ti-18Si-5Ge-5Al in situ composites. Journal of Alloys and Compounds, 550, 553-560.
- Study of the effect of Cr and Ti additions in the microstructure of Nb-18Si-5Ge based in-situ composites. Intermetallics, 26, 18-25.
- Study of the effect of Al, Cr and Sn additions on the microstructure and properties of Nb silicide based alloys. Materials Research Society Symposium Proceedings, 1295, 367-372.
- Study of the role of Hf, Mo and W additions in the microstructure of Nb-20Si silicide based alloys. Intermetallics, 19(10), 1612-1621.
- The effect of Ge and Ti additions on the microstructures and properties of Nb-18Si based alloys. Materials Research Society Symposium Proceedings, 1295, 379-384.
- Study of the role of Hf, Mo and W additions in the microstructure of Nb-20Si silicide based alloys. Intermetallics.
- Study of the effect of Ti and Ge in the microstructure of Nb-24Ti-18Si-5Ge in situ composite. Intermetallics.
- Microstructural characterisation of Al - Hf and Al - Li - Hf spray deposits. Materials Characterization, 62(4), 402-408.
- Study of the role of Fe and Sn additions in the microstructure of Nb-24Ti-18Si-5Cr silicide based alloys. INTERMETALLICS, 18(9), 1729-1736.
- Study of the role of Mo and Ta additions in the microstructure of Nb-18Si-5Hf silicide based alloy. INTERMETALLICS, 18(8), 1524-1530.
- Study of the effects of Ge addition on the microstructure of Nb-18Si in situ composites. INTERMETALLICS, 18(5), 1072-1078.
- Study of the role of B addition on the microstructure of the Nb-24Ti-18Si-8B alloy. INTERMETALLICS, 18(5), 1033-1038.
- Study of the role of Al, Cr and Ti additions in the microstructure of Nb-18Si-5Hf base alloys. INTERMETALLICS, 18(2), 242-253.
- Classification and rating of inclusions in a high carbon steel. TMS Annual Meeting, 25-36.
- Rating inclusions in an as-cast carbon steel. AISTech - Iron and Steel Technology Conference Proceedings, 841-848.
- Crystallization of the amorphous Fe80Zr12B8 alloy under controlled heating. J ALLOY COMPD, 459(1-2), 185-190.
- Monitoring atomic level electronic changes in the alloying of stainless steels with Auger and photoelectron spectroscopy. SURF SCI, 602(1), 216-225.
- The role of Fe and Ti additions in the microstructure of Nb-18Si-5Sn silicide-based alloys. INTERMETALLICS, 15(12), 1529-1537.
- The role of Sn and Ti additions in the microstructure of Nb-18Si base alloys. INTERMETALLICS, 15(12), 1518-1528.
- A study of the microstructures and oxidation of Nb-Si-Cr-Al-Mo in situ composites alloyed with Ti, Hf and Sn. INTERMETALLICS, 15(3), 382-395.
- A thermo-gravimetric and microstructural study of the oxidation of Nb-ss/Nb5Si3-based in situ composites with Sn addition. INTERMETALLICS, 15(3), 270-281.
- A study of the effects of Hf and Sn additions on the microstructure of Nb-ss/Nb5Si3 based in situ composites. INTERMETALLICS, 15(1), 69-76.
- Oxidation of Nb-Si-Cr-Al in situ composites with Mo, Ti and Hf additions. MAT SCI ENG A-STRUCT, 441(1-2), 26-38.
- Sedimentation casting of wear resistant metal matrix composites. MAT SCI ENG A-STRUCT, 435, 187-192.
- Electronic structure of Ti metal and TiO2 powder studied by hard and soft (Cu K alpha(1) and AlK alpha 1) X-ray photoelectron and Auger spectroscopy. J ELECTRON SPECTROSC, 152(3), 148-151.
- The 1s XPS spectra of the 3d transition metals from scandium to cobalt. J ELECTRON SPECTROSC, 152(3), 129-133.
- Study of three-phase equilibrium in the Nb-rich corner of Nb-Si-Cr system. INTERMETALLICS, 14(7), 832-837.
- Study of the role of Ta and Cr additions in the microstructure of Nb-Ti-Si-Al in situ composites. INTERMETALLICS, 14(6), 639-659.
- Study of the role of Al and Cr additions in the microstructure of Nb-Ti-Si in situ composites (vol 13, pg 1079, 2005). INTERMETALLICS, 14(5), 584-584.
- The effects of Ti and Mo additions on the microstructure of Nb-silicide based in situ composites. INTERMETALLICS, 14(3), 227-235.
- Effect of Al, Cr and Ta additions on the oxidation behaviour of Nb-Ti-Si in situ composites at 800 degrees C. MAT SCI ENG A-STRUCT, 416(1-2), 269-280.
- Investigation of intrinsic plasmon energy losses associated with the Fe 1s core level in metallic iron. SURF SCI, 600(2), 265-272.
- The EU-funded "ULTMAT" project: Ultra high temperature materials for turbines. ICAS-Secretariat - 25th Congress of the International Council of the Aeronautical Sciences 2006, 3, 1943-1952.
- Modelling fatigue crack growth in a residual stress field. American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP, 2006.
- Droplet dynamic and solidification progress during rotating disk centrifugal atomization. Zhongguo Youse Jinshu Xuebao/Chinese Journal of Nonferrous Metals, 16(5), 793-799.
- Study of the role of Al and Cr additions in the microstructure of Nb-Ti-Si in situ composites. INTERMETALLICS, 13(10), 1079-1095.
- Characterization of in situ mechanically worked PVD Mg-Ti alloys. PHILOS MAG, 85(24), 2733-2756.
- Characterisation of corrosion products formed on PVD in situ mechanically worked Mg-Ti alloys. J ALLOY COMPD, 392(1-2), 127-141.
- Electronic structure and bonding in Mo3Si, Mo5Si3, and Mo(Si,Al)2 alloys investigated by x-ray photoelectron spectroscopy and density-functional theory. PHYS REV B, 71(7).
- Performance and application of a high energy monochromated CuK alpha(1) X-ray source for the electron spectroscopy of materials. J ELECTRON SPECTROSC, 142(2), 151-162.
- High-energy monochromated CuK alpha(1) x-ray source for electron spectroscopy of materials: initial results. SURF INTERFACE ANAL, 36(3), 275-279.
- Improving high-temperature oxidation resistance of TiAl-based alloys by MnCl2 surface treatment. INTERMETALLICS, 11(7), 651-660.
- Free-electron metal alloys: a study by high-energy XPS. SURF INTERFACE ANAL, 33(10-11), 775-780.
- A study of alloying behaviour in the Ti-Al-V system. ACTA MATER, 50(8), 1951-1960.
- Study of alloying behaviour in metastable Mg-Ti solid solutions using Auger parameter measurements and charge-transfer calculations. PHILOS MAG A, 82(4), 841-855.
- Effect of reinforcement geometry on matrix stresses in three aluminium metal matrix composite systems. SCRIPTA MATER, 45(8), 993-1000.
- X-ray photoelectron spectroscopy studies of Ti-Al and Ti-Al-V alloys using CrK beta radiation. SURF INTERFACE ANAL, 31(8), 734-744.
- An experimental study of bonding and crystal structure modifications in MoSi2 and MoSi2+xAl (x=10 to 40 at% Al) via Auger parameter shifts and charge transfer calculations. ACTA MATER, 49(6), 1063-1078.
- On the oxidation behaviour of MoSi2. INTERMETALLICS, 9(2), 125-136.
- Electron spectroscopy with CrK beta photons: high energy XPS and X-AES. J ELECTRON SPECTROSC, 113(2-3), 153-166.
- omega-Phase formation in a rapidly solidified Cr-40 at.% Al alloy. PHIL MAG LETT, 80(11), 703-710.
- On the omega phase formation in Cr-Al and Ti-Al-Cr alloys. ACTA MATER, 48(14), 3671-3685.
- Thermodynamic reassessment of the Mo-Si and Al-Mo-Si systems. INTERMETALLICS, 8(8), 953-962.
- On the structural evolution of Fe-Al laminates obtained by physical vapour deposition. Philosophical Magazine A, 80(3), 693-710.
- On the structural evolution of Fe-Al laminates obtained by physical vapour deposition. PHILOS MAG A, 80(3), 693-710.
- Calculations of charge transfer in Mg- and Al-transition metal alloys using the Auger parameter. SURF INTERFACE ANAL, 29(1), 65-72.
- Development of physical vapour deposited Mg-Zr alloys - Part 3 - Comparison of alloying and corrosion behaviour in Mg-V and Mg-Zr physical vapour deposited alloys. MATER SCI TECH SER, 15(12), 1373-1378.
- Development of physical vapour deposited Mg-Zr alloys - Part 1 - Characterisation of as deposited alloys. MATER SCI TECH-LOND, 15(12), 1349-1357.
- Development of physical vapour deposited Mg-Zr alloys - Part 2 - Characterisation of corrosion products. MATER SCI TECH-LOND, 15(12), 1359-1372.
- Lattice parameters of TM(3d)-Al solid solutions. MAT SCI ENG A-STRUCT, 271(1-2), 286-290.
- Calculations of charge transfer in Nb-17Al and V-50Al alloys, using the Auger parameter. INTERMETALLICS, 7(8), 937-946.
- Influence of 2.8% zirconium addition on the microstructure of rapidly solidified A1-8Fe-4Ni alloy. MAT SCI ENG A-STRUCT, 267(1), 60-70.
- Influence of atomised powder characteristics on texture and microstructure development in extruded A1-8Fe-4Ni base alloys. MAT SCI ENG A-STRUCT, 267(1), 71-81.
- Solidification structures of Ti-Al-Cr alloys. INTERMETALLICS, 7(5), 579-587.
- Development of Mg-V alloys by physical vapour deposition Part 1 - Bulk and surface characterisation. MATER SCI TECH SER, 14(7), 689-698.
- A study of charge transfer in vapour deposited Mg-V crystalline alloys via changes in Auger parameters. PHILOS MAG A, 77(4), 1067-1079.
- Characterisation of thick film Ti/Al nanolaminates. MICRON, 29(1), 17-31.
- Development of Mg-V alloys by physical vapour deposition Part 2 - Characterisation of corrosion products formed in 3 wt-%NaCl. Materials Science and Technology, 14(7), 699-711.
- Calculation of powder particle size in rotating disc centrifugal atomization using wave theory. INT J NON-EQUILIB PR, 11(1), 55-70.
- Preliminary corrosion evaluation of some novel bulk electron beam evaporated magnesium alloys.. CORROS REV, 16(1-2), 159-174.
- The effect of reinforcement on the notched and unnotched room temperature tensile properties of Al-4wt%Cu/SiCp MMCs. MAT SCI ENG A-STRUCT, 241(1-2), 19-29.
- Role of nucleation in phase competition in binary Ti-Al alloys. MATER SCI TECH SER, 13(10), 797-805.
- Role of nucleation in phase competition in binary Ti-Al alloys. Materials Science and Technology, 13(10), 797-805.
- Omega phase formation in a physically vapour-deposited Fe-Al alloy. PHIL MAG LETT, 76(3), 207-216.
- The dependence of ageing on 3-dimensional spatial distribution of reinforcement in Al-4wt%Cu/SiCp MMCS. SCRIPTA MATER, 37(3), 305-310.
- Morphological evolution of lamellar structures: The Cu-Al eutectoid. ACTA MATER, 45(5), 2027-2042.
- Ultra-thin twin plates and growth domains in the gamma phase as a product of the B2 phase decomposition in Ti-40at%Al-10at%V. PHILOS MAG A, 75(3), 657-676.
- Beta phase decomposition in Nb-17 at% Al alloy. PHILOS MAG A, 75(3), 637-655.
- Microstructural control in gamma titanium aluminide intermetallic powder compacts. Proceedings of the Advanced Particulate Materials & Processes, 139-144.
- Phase transformations in Nb-17Al-xMo alloys. INTERMETALLICS, 5(3), 203-219.
- The intermediate and high-temperature oxidation behaviour of (Mo,X)Si-2 (X=W,Ta) intermetallic alloys. INTERMETALLICS, 5(2), 117-126.
- The intermediate and high temperature oxidation behaviour of Mo(Si1-xAlx)(2) intermetallic alloys. INTERMETALLICS, 5(1), 69-81.
- Ordering and decomposition of the beta phase in melt-spun TiAl1-xVx alloys. MAT SCI ENG A-STRUCT, 216(1-2), 1-10.
- A study of the combustion synthesis of MoSi2 and MoSi2-matrix composites. J MATER SCI, 31(16), 4221-4226.
- Microstructural control in a gamma-TiAl alloy by MA and HIPing. JOM-J MIN MET MAT S, 48(7), 40-41.
- On the application of energy filtering TEM in materials science .2. Study of a fibre-reinforced metal matrix composite. MICRON, 27(2), 107-120.
- Reaction synthesis of carbide-reinforced cast iron. J MATER SCI LETT, 15(6), 473-474.
- Degassing of gas atomised Al-Li base alloy powders .2. Surface analysis studies. INT J RAPID SOLIDIF, 9(3), 211-240.
- Degassing of gas atomised Al-Li base alloy powders .1. Mass spectrometry studies. INT J RAPID SOLIDIF, 9(3), 187-209.
- Interfacial reactions in Ti-6Al-4V/sigma(SM 1240) fibre metal matrix composite. MATER SCI TECH SER, 11(11), 1156-1159.
- Evaluation of the effect of sizing levels on transverse flexural and shear strengths of carbon epoxy composites. J MATER PROCESS TECH, 54(1-4), 17-20.
- Ledge mechanism of pearlite growth: Growth velocity of ferrous pearlite. MATER SCI TECH SER, 11(10), 977-984.
- Ledge mechanism of pearlite growth: growth velocity of ferrous pearlite. Materials Science and Technology, 11(10), 977-984.
- APPRAISAL OF RECENT WORK ON ROLE OF CRYSTALLOGRAPHY IN FERROUS AND NONFERROUS PEARLITE. MATER SCI TECH SER, 11(8), 717-727.
- THE LAMELLAR GAMMA+BETA STRUCTURE IN AL-30TI-20V ALLOY. SCRIPTA METALL MATER, 33(1), 13-17.
- THE LEDGE MECHANISM OF PEARLITE GROWTH. SCRIPTA METALL MATER, 32(12), 1965-1966.
- OMEGA-PHASE FORMATION IN V-AL AND TI-AL-V ALLOYS. PHILOS MAG A, 71(6), 1389-1408.
- Characterisation of spatial distribution of reinforcement in powder metallurgy route Al/SiCpmetal matrix composites. Materials Science and Technology, 11(3), 222-227.
- Characterisation of spatial distribution of reinforcement in powder metallurgy route Al/SiCpmetal matrix composites. Materials Science and Technology, 11(3), 213-221.
- CHARACTERIZATION OF SPATIAL-DISTRIBUTION OF REINFORCEMENT IN POWDER-METALLURGY ROUTE AL/SICP METAL-MATRIX COMPOSITES .1. TECHNIQUES BASED ON MICROSTRUCTURE. MATER SCI TECH SER, 11(3), 213-221.
- CHARACTERIZATION OF SPATIAL-DISTRIBUTION OF REINFORCEMENT IN POWDER-METALLURGY ROUTE AL/SICP METAL-MATRIX COMPOSITES .2. TECHNIQUES BASED ON LOCAL ENERGY-DISPERSIVE X-RAY-ANALYSIS. MATER SCI TECH SER, 11(3), 222-227.
- PHASE COMPETITION AND SELECTION IN AL-30TI-20V ALLOY. INT J RAPID SOLIDIF, 9(1), 13-32.
- PHASE-TRANSFORMATIONS IN TI-40AL-10V. INTERMETALLICS, 3(4), 315-325.
- THE EFFECT OF THE SPATIAL-DISTRIBUTION OF REINFORCEMENT ON THE FABRICATION AND HEAT-TREATMENT OF (AL-4WT-PERCENT-CU)-SIC PARTICLE METAL-MATRIX COMPOSITES. MAT SCI ENG A-STRUCT, 189(1-2), 285-290.
- COATING AND FIBER EFFECTS ON SIC-REINFORCED TITANIUM. JOM-J MIN MET MAT S, 46(11), 62-67.
- EFFECT OF FIBER SURFACE-MORPHOLOGY ON STABILITY OF C/TIBX COATINGS IN TI-6AL-4V/SIGMA (SM1240) FIBER METAL-MATRIX COMPOSITE. MATER SCI TECH SER, 10(10), 887-893.
- AS RECEIVED TI-6AI-4V/SIGMA/SIC FIBER-COMPOSITE. MATER SCI TECH SER, 10(9), 797-806.
- PREDICTION OF PHASE SELECTION IN RAPID SOLIDIFICATION USING TIME-DEPENDENT NUCLEATION THEORY. ACTA METALL MATER, 42(9), 2937-2942.
- ON THE MEAN INTERNAL-STRESSES IN 2-DUCTILE-PHASE ALLOYS. MAT SCI ENG A-STRUCT, 184(1), 57-64.
- THE LEDGE MECHANISM OF PEARLITE GROWTH - SOME THOUGHTS ON THE SOLUTION TO THE KINETIC PROBLEM. SCRIPTA METALL MATER, 30(8), 1031-1036.
- THE METASTABLE DISORDERED GAMMA (TIAL) PHASE AND ITS ORDERING PROCESS IN A RAPIDLY SOLIDIFIED EQUIATOMIC TIAL ALLOY WITH VANADIUM ADDITION. SCRIPTA METALL MATER, 30(7), 809-814.
- Study of the Effects of Al, Ta, W Additions on the Microstructure and Properties of Mosi2 Base Alloys. MRS Proceedings, 364.
- Microstructure property relationships in PM Fe-Cr-B alloys. Proceedings of the Symposium on High Performance Metal and Ceramic Matrix Composites, 99-111.
- A GENERALIZED LAW OF MIXTURES. J MATER SCI, 29(1), 141-150.
- MICROSTRUCTURAL CHARACTERIZATION OF 2-PHASE MATERIALS. MATER SCI TECH SER, 9(12), 1094-1100.
- Microstructural characterisation of two phase materials. Materials Science and Technology, 9(12), 1094-1100.
- YIELD STRENGTH OF 2 DUCTILE-PHASE ALLOYS. MATER SCI TECH SER, 9(10), 863-868.
- Vield strength of two ductile phase alloys. Materials Science and Technology, 9(10), 863-868.
- ON THE LEDGE MECHANISM OF PEARLITE GROWTH - THE CU-AL LAMELLAR EUTECTOID. SCRIPTA METALL MATER, 29(3), 401-406.
- DEVELOPMENT OF CORROSION-RESISTANT MAGNESIUM ALLOYS .1. CHARACTERIZATION OF SPLAT QUENCHED MG-10AL AND MG-16AL ALLOYS. MATER SCI TECH SER, 9(6), 507-511.
- DEVELOPMENT OF CORROSION-RESISTANT MAGNESIUM ALLOYS .2. STRUCTURE OF CORROSION PRODUCTS ON RAPIDLY SOLIDIFIED MG-16AL ALLOYS. MATER SCI TECH SER, 9(6), 513-519.
- THE APPLICATION OF CHEMICAL-STATE AES AND SAM TO THE EXAMINATION OF SPRAY-FORMED ALUMINUM-ALLOY FRACTURE SURFACES. SURF INTERFACE ANAL, 20(7), 589-594.
- STRENGTHENING MECHANISMS IN POWDER-METALLURGY AL-LI-HF ALLOYS. MATER SCI TECH SER, 9(3), 228-234.
- Strengthening mechanisms in powder metallurgy Al–Li–Hf alloys. Materials Science and Technology, 9(3), 228-234.
- EXTENSION OF THE HALL-PETCH RELATION TO 2-DUCTILE-PHASE ALLOYS. PHILOS MAG A, 67(2), 515-531.
- THE MICROSTRUCTURE OF RAPIDLY SOLIDIFIED AL-8FE-4NI-1MO ALLOY POWDERS. INT J RAPID SOLIDIF, 8(1), 41-64.
- PREDICTION OF YOUNG MODULUS OF PARTICULATE 2 PHASE COMPOSITES. MATER SCI TECH SER, 8(10), 922-929.
- Prediction of Young's modulus of particulate two phase composites. Materials Science and Technology, 8(10), 922-929.
- Cooling rates in gas atomised Al-4wt%Cu alloy powders. International journal of rapid solidification, 7(3), 177-190.
- COOLING RATES IN GAS ATOMIZED AL-4WT-PERCENT-CU ALLOY POWDERS. INT J RAPID SOLIDIF, 7(3), 177-190.
- RAPID SOLIDIFICATION OF AL-HF ALLOYS - ANALYSIS OF STRENGTH OF EXTRUDED HIGH-PRESSURE GAS ATOMIZED POWDERS. INT J RAPID SOLIDIF, 7(2), 109-126.
- DESIGN OF POWDER-METALLURGY ALUMINUM-ALLOYS FOR APPLICATIONS AT ELEVATED-TEMPERATURES .2. TENSILE PROPERTIES OF EXTRUDED AND CONFORMED GAS ATOMIZED POWDERS. MATER SCI TECH SER, 7(5), 419-426.
- DESIGN OF POWDER-METALLURGY ALUMINUM-ALLOYS FOR APPLICATIONS AT ELEVATED-TEMPERATURES .1. MICROSTRUCTURE OF HIGH-PRESSURE GAS ATOMIZED POWDERS. MATER SCI TECH SER, 7(4), 334-340.
- SURFACE CONTAMINATION AND ITS EFFECT ON THE CORROSION OF RAPIDLY SOLIDIFIED MG-AL ALLOY SPLATS. J MATER SCI, 26(6), 1497-1504.
- On the development of corrosion resistant Mg-Al alloys. Light-Weight Alloys for Aerospace Applications II, 439-451.
- Design of powder metallurgy aluminium alloys. Light-Weight Alloys for Aerospace Applications II, 297-310.
- RAPID SOLIDIFICATION OF AL-HF ALLOYS - SOLIDIFICATION MICROSTRUCTURES AND DECOMPOSITION OF SOLID-SOLUTIONS. INT J RAPID SOLIDIF, 6(3-4), 185-213.
- SOLIDIFICATION OF HIGH-PRESSURE GAS ATOMIZED AL-CR ALLOY POWDERS .1. DEPENDENCE OF NUCLEATION TEMPERATURE ON NUCLEANT POTENCY. INT J RAPID SOLIDIF, 6(2), 87-100.
- SOLIDIFICATION OF HIGH-PRESSURE GAS ATOMIZED AL-CR ALLOY POWDER PARTICLES .2. DISTRIBUTION OF INTERMETALLICS IN THE POWDER PARTICLES. INT J RAPID SOLIDIF, 6(2), 101-114.
- SPECIMEN PREPARATION FOR TEM STUDIES OF RAPIDLY SOLIDIFIED POWDERS. INT J RAPID SOLIDIF, 6(1), 77-86.
- OXIDATION AND SURFACE SEGREGATION IN RAPIDLY SOLIDIFIED AL-ALLOY POWDERS. INT J RAPID SOLIDIF, 5(2-3), 189-217.
- THE RESPONSE OF AL-CR-HF ALLOYS TO EXTENDED SOAKING TREATMENT AT 0.7 TM. INT J RAPID SOLIDIF, 5(2-3), 177-188.
- PREFERENTIAL NUCLEATION IN UNDERCOOLED LIQUID ALUMINUM ALLOYS-II. MATER SCI TECH SER, 5(6), 609-612.
- Preferential nucleation in undercooled liquid aluminium alloys II. Materials Science and Technology, 5(6), 609-612.
- Surface studies of rapidly solidified aluminium alloy powder. Key Engineering Materials, 29-31, 291-302.
- Powder metallurgy research at the University of Surrey. Key Engineering Materials, 29-31, 783-792.
- CORROSION PRODUCTS FORMED ON A RAPIDLY SOLIDIFIED MG-AL ALLOY. INT J RAPID SOLIDIF, 4(4), 231-250.
- A TECHNIQUE FOR EVALUATING ALUMINUM-ALLOYS FOR HIGH-PRESSURE GAS ATOMIZATION. MATER SCI ENG, 98, 115-117.
- DEVELOPMENT OF AL-CR-X AND AL-CR-ZR-X ALLOYS BY RAPID SOLIDIFICATION FROM THE MELT. MATER SCI ENG, 98, 143-147.
- RAPID SOLIDIFICATION OF PERITECTIC ALUMINUM-ALLOYS. MATER SCI ENG, 98, 217-219.
- PREFERENTIAL NUCLEATION IN UNDERCOOLED LIQUID ALUMINUM-ALLOYS. MATER SCI TECH SER, 4(2), 157-160.
- THE MICROSTRUCTURE OF RAPIDLY SOLIDIFIED AL-CR-FE POWDER. MATER SCI ENG, 98, 61-64.
- EFFECT OF DISPERSOID-FORMING ADDITIONS ON THE RESPONSE TO HEAT-TREATMENT OF SPLAT-QUENCHED AL-LI-X ALLOYS. J PHYS-PARIS, 48(C-3), 341-346.
- INTERNAL STRUCTURE OF SOLIDIFIED AEROSOL DROPLETS - ZINC. J MATER SCI LETT, 5(10), 981-983.
- PARTICLE CONDENSATION IN THE VAPOR EMITTED BY A HEATED SOURCE. J COLLOID INTERF SCI, 112(1), 42-53.
- Preparation and properties of metallic aerosol particles. International Materials Reviews, 31(1), 258-288.
- PREPARATION AND PROPERTIES OF METALLIC AEROSOL-PARTICLES. INT MATER REV, 31(6), 258-288.
- Preparation and properties of metallic aerosol particles. International Materials Reviews, 31(1), 258-288.
- SOLIDIFICATION OF DROPLETS. MATER LETT, 3(12), 508-512.
- CONDENSATION AND CRYSTAL MORPHOLOGY OF BISMUTH AEROSOLS. J MATER SCI, 20(10), 3691-3696.
- ON THE SOLIDIFICATION OF DROPLETS IN CADMIUM AND ZINC AEROSOLS BY THE FLOATING RAFT MECHANISM. J MATER SCI LETT, 3(12), 1095-1096.
- THE INFLUENCE OF ANISOTROPY ON THE LIQUID SOLID-PHASE TRANSITIONS IN PURE METALS .1. THE CASE OF CD AND ZN. J CRYST GROWTH, 69(2-3), 449-455.
- Particle morphology - Description and measurement. Analytical Proceedings, 18(2), 73-76.
- EVAPORATION BEHAVIOR OF METALLIC AEROSOL CONDENSATES. J MICROSC-OXFORD, 124(OCT), 89-93.
- SOLIDIFICATION OF METALLIC AEROSOL DROPLETS FROM FLOATING RAFTS - A TEST OF THE SPIRAL GROWTH-MECHANISM FOR CD AND ZN. J MATER SCI, 16(4), 1103-1107.
- CRYSTALLOGRAPHY OF METALLIC AEROSOL PRECIPITATES .2. SOLIDIFICATION OF DROPLETS TO SPHERICAL CRYSTALS IN CADMIUM AND ZINC. J MATER SCI, 15(11), 2921-2924.
- CRYSTALLOGRAPHY OF METALLIC AEROSOL PRECIPITATES - DENDRITIC ORIGIN OF HEXAGONAL PRISMS IN CD AND ZN. J MATER SCI, 14(6), 1421-1424.
- Microstructure and Properties of Complex Concentrated C14–MCr2 Laves, A15–M3X and D8m M5Si3 Intermetallics in a Refractory Complex Concentrated Alloy. Alloys, 3(3), 190-231.
- On the Microstructure and Properties of Complex Concentrated bcc Solid Solution and Tetragonal D8m M5Si3 Silicide Phases in a Refractory Complex Concentrated Alloy. Alloys, 3(1), 59-95.
- A Perspective of the Design and Development of Metallic Ultra-High Temperature Materials: Refractory Metal Intermetallic Composites, Refractory Complex Concentrated Alloys and Refractory High Entropy Alloys. Alloys, 2(3), 184-212.
- On the Nb5Si3 Silicide in Metallic Ultra-High Temperature Materials. Metals, 13(6), 1023-1023.
- On the Stability of Complex Concentrated (CC)/High Entropy (HE) Solid Solutions and the Contamination with Oxygen of Solid Solutions in Refractory Metal Intermetallic Composites (RM(Nb)ICs) and Refractory Complex Concentrated Alloys (RCCAs). Materials, 15(23), 8479-8479.
- A Study of the Effects of Hf and Sn on the Microstructure, Hardness and Oxidation of Nb-18Si Silicide-Based Alloys-RM(Nb)ICs with Ti Addition and Comparison with Refractory Complex Concentrated Alloys (RCCAs). Materials, 15(13), 4596-4596.
- Refractory Metal Intermetallic Composites, High-Entropy Alloys, and Complex Concentrated Alloys: A Route to Selecting Substrate Alloys and Bond Coat Alloys for Environmental Coatings. Materials, 15(8), 2832-2832.
- On the Microstructure and Properties of Nb-18Si-6Mo-5Al-5Cr-2.5W-1Hf Nb-Silicide Based Alloys with Ge, Sn and Ti Additions (at.%). Materials, 13(20), 4548-4548.
- On the Microstructure and Properties of Nb-12Ti-18Si-6Ta-5Al-5Cr-2.5W-1Hf (at.%) Silicide-Based Alloys with Ge and Sn Additions. Materials, 13(17), 3719-3719.
- On the Microstructure and Isothermal Oxidation at 800 and 1200 °C of the Nb-24Ti-18Si-5Al-5Cr-5Ge-5Sn (at.%) Silicide-Based Alloy. Materials, 13(3), 722-722.
- The Effect of Ge Addition on the Oxidation of Nb-24Ti-18Si Silicide Based Alloys. Materials, 12(19), 3120-3120. View this article in WRRO
- On The Microstructures and Hardness of The Nb-24Ti-18Si-5Al-5Cr-5Ge and Nb-24Ti-18Si-5Al-5Cr-5Ge-5Hf (at.%) Silicide Based Alloys. Materials, 12(17), 2655-2655.
- On the Microstructure and Isothermal Oxidation at 800, 1200, and 1300 °C of the Al-25.5Nb-6Cr-0.5Hf (at %) Alloy. Materials, 12(16), 2531-2531.
- On the Microstructure and Isothermal Oxidation of the Si-22Fe-12Cr-12Al-10Ti-5Nb (at.%) Alloy. Materials, 12(11), 1806-1806.
- Type of Primary Nb5Si3 and Precipitation of Nbss in αNb5Si3 in a Nb-8.3Ti-21.1Si-5.4Mo-4W-0.7Hf (at.%) Near Eutectic Nb-Silicide-Based Alloy. Materials, 11(6), 967-967.
- Alloying and Hardness of Eutectics with Nbss and Nb5Si3 in Nb-silicide Based Alloys. Materials, 11(4), 592-592.
- Alloying and Properties of C14–NbCr2 and A15–Nb3X (X = Al, Ge, Si, Sn) in Nb–Silicide-Based Alloys. Materials, 11(3), 395-395. View this article in WRRO
- On the Alloying and Properties of Tetragonal Nb5Si3 in Nb-Silicide Based Alloys. Materials, 11(1), 69-69. View this article in WRRO
- Cementite Precipitation of a H21 Tool Steel after Hot Compression and Double Temper. Advanced Materials Research, 1043, 154-158.
- Solidification Behaviour of a H21 Tool Steel. Advanced Materials Research, 1043, 159-164.
- The Breakdown of Carbide Network in a H23 Tool Steel by Hot Axisymmetric Compression. Advanced Materials Research, 1043, 149-153.
- Influence of high temperature deformation and double tempering
on the microstructure of a H21 tool steel. Materials Science and Engineering A.
Chapters
- The distribution of heterogeneous nucleants in Al–Cr alloy powders, Rapidly Quenched Materials (pp. 767-770). Elsevier
- Rapid Solidification of Peritectic Aluminium Alloys, Rapidly Quenched Metals 6 (pp. 217-219). Elsevier
- The Microstructure of Rapidly Solidified Al–Cr–Fe Powder, Rapidly Quenched Metals 6 (pp. 61-64). Elsevier
- A Technique for Evaluating Aluminium Alloys for High Pressure Gas Atomization, Rapidly Quenched Metals 6 (pp. 115-117). Elsevier
- Development of Al–Cr–X and Al–Cr–Zr–X Alloys by Rapid Solidification from the Melt, Rapidly Quenched Metals 6 (pp. 143-147). Elsevier
- Beyond Nickel Based Superalloys John Wiley & Sons, Ltd
- Formation and Characteristics of Banded Microstructures in a Consolidated Al-Fe Based Alloy Obtained from Rapidly Solidified Powders, Materials Development and Processing - Bulk Amorphous Materials, Undercooling and Powder Metallurgy (pp. 265-270). Wiley-VCH Verlag GmbH & Co. KGaA
- A Crystallographic Study of TiAl-Cr Alloys, Intermetallics and Superalloys (pp. 330-335). Wiley-VCH Verlag GmbH & Co. KGaA
- Microstructural Studies of Mo-Si-Al Alloys, Intermetallics and Superalloys (pp. 345-349). Wiley-VCH Verlag GmbH & Co. KGaA
Conference proceedings papers
- Foreword. Metallurgical and Materials Transactions A, Vol. 46(2) (pp 556-556)
- An XPS study of the interatomic charge distribution in stainless steels. SURFACE AND INTERFACE ANALYSIS, Vol. 42(6-7) (pp 722-725)
- High-energy X-ray photoelectron spectroscopy with new monochromatised CuK alpha(1) X-rays; characteristics, capabilities and limitations. SURFACE AND INTERFACE ANALYSIS, Vol. 38(4) (pp 703-706)
- Solidification of high-Cr white cast iron-WC particle reinforced composites. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 413 (pp 538-544)
- Glass forming ability of multi-component metallic systems. INTERMETALLICS, Vol. 13(3-4) (pp 409-414)
- Optimization of x-ray monochromating systems: application to LiF(220) crystal with Johansson geometry for CuK alpha 1 (8047.78 eV). SURFACE AND INTERFACE ANALYSIS, Vol. 36(8) (pp 1119-1121)
- Phase selection in non-equilibrium processed TM-Al intermetallic alloys. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 375-77 (pp 201-206)
- The roles of thermodynamics and transformation kinetics on phase selection in the non-equilibrium processing of materials. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 375-77 (pp 556-560)
- Synthesis and characterisation of oxidation resistant coating for gamma TiAl. GAMMA TITANIUM ALUMINIDES 2003 (pp 567-574)
- Development of oxidation resistant coatings based on gamma TiAl. SURFACE ENGINEERING: IN MATERIALS SCIENCE II (pp 273-281)
- Auger parameter studies of aluminium-transition metal alloys. SURFACE AND INTERFACE ANALYSIS, Vol. 34(1) (pp 360-364)
- Phase selection in magnetron sputter-deposited TiAl alloy. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 329 (pp 141-146)
- Prediction of omega phase formation in Ti-Al-X alloys. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 329 (pp 914-919)
- Ion beam synthesis of gallium nitride. NUCLEAR INSTRUMENTS & METHODS IN PHYSICS RESEARCH SECTION B-BEAM INTERACTIONS WITH MATERIALS AND ATOMS, Vol. 175 (pp 678-682)
- Prediction of omega phase formation in TiAl-X alloys. TITANIUM ALLOYS AT ELEVATED TEMPERATURE: STRUCTURAL DEVELOPMENT AND SERVICE BEHAVIOUR, Vol. 755(4) (pp 291-300)
- Structural development in sputter deposited TiAlCr coatings. STRUCTURAL INTERMETALLICS 2001 (pp 663-668)
- A study of the oxidation behaviour of Mo-Si-Al intermetallic alloys at low, intermediate and high temperatures. STRUCTURAL INTERMETALLICS 2001 (pp 561-570)
- Formation and characteristics of banded microstructures in a consolidated AL-Fe based alloy obtained from RS powders. ADVANCED POWDER TECHNOLOGY II, Vol. 189-1 (pp 509-514)
- Centrifugal atomisation of alloys. ADVANCED POWDER TECHNOLOGY II, Vol. 189-1 (pp 245-251)
- Eutectoid decomposition in three Ti-Co alloys. NUCLEATION AND GROWTH PROCESSES IN MATERIALS, Vol. 580 (pp 93-98)
- Studies of Mg-V and Mg-Zr alloys. MAGNESIUM TECHNOLOGY 2000 (pp 175-180)
- Microstructure property studies of in situ mechanically worked PVD Mg-Ti alloys. MAGNESIUM TECHNOLOGY 2000 (pp 169-174)
- Interplay of thermodynamics and transformation kinetics on microstructural development in TiAl-based alloys. GAMMA TITANIUM ALUMINIDES 1999 (pp 189-194)
- How stable is the omega phase in TiAl-X alloys?. GAMMA TITANIUM ALUMINIDES 1999 (pp 155-159)
- Microstructure-property studies in spray formed Al alloys. ADVANCED POWDER TECHNOLOGY, Vol. 299-3 (pp 392-397)
- Properties of silicides and silicide composites densified by pressureless reactive sintering. ADVANCED POWDER TECHNOLOGY, Vol. 299-3 (pp 165-170)
- Interfacial studies in titanium aluminide SiCf composites. CMMC 96 - PROCEEDINGS OF THE FIRST INTERNATIONAL CONFERENCE ON CERAMIC AND METAL MATRIX COMPOSITES, PTS 1 AND 2, Vol. 127- (pp 671-678)
- Characterisation of physical vapour deposited Mg-V alloys. PROCEEDINGS OF THE THIRD INTERNATIONAL MAGNESIUM CONFERENCE (pp 285-298)
- Physical vapour deposited Mg-Ti alloys. PROCEEDINGS OF THE THIRD INTERNATIONAL MAGNESIUM CONFERENCE (pp 627-636)
- Porosity and oxide distribution in spray-formed Al-5Cr-1.5Zr alloy. JOURNAL OF MATERIALS SYNTHESIS AND PROCESSING, Vol. 5(1) (pp 105-110)
- Calculation of powder size in centrifugal atomization and spray forming. JOURNAL OF MATERIALS SYNTHESIS AND PROCESSING, Vol. 5(1) (pp 117-121)
- Study of the microstructure and properties of spray-formed Al-5Cr-1.5Zr. JOURNAL OF MATERIALS SYNTHESIS AND PROCESSING, Vol. 5(1) (pp 59-63)
- Synthesis and characterisation of titanium/aluminum nanolaminates. JOURNAL OF MAGNETISM AND MAGNETIC MATERIALS, Vol. 156(1-3) (pp 17-18)
- Influence of Zr addition on the microstructure and properties of PM Al-8Fe-4Ni alloy. ALUMINIUM ALLOYS: THEIR PHYSICAL AND MECHANICAL PROPERTIES, PTS 1-3, Vol. 217 (pp 629-634)
- Synthesis of a 8-TiAl alloy by mechanical alloying and hot isostatic pressing. HOT ISOSTATIC PRESSING, CONFERENCE PROCEEDINGS (pp 91-95)
- Calculation of phase competition and selection in solidification using a combined nucleation and calphad approach. THERMODYNAMICS AND KINETICS OF PHASE TRANSFORMATIONS, Vol. 398 (pp 45-50)
- Solidification of Al-7Si-2Ti-2Ce alloy ribbons. ALUMINIUM ALLOYS: THEIR PHYSICAL AND MECHANICAL PROPERTIES, PTS 1-3, Vol. 217 (pp 213-218)
- Transient nucleation effects on extension of solid solubility in Al-Ti and Al-Zr alloys. ALUMINIUM ALLOYS: THEIR PHYSICAL AND MECHANICAL PROPERTIES, PTS 1-3, Vol. 217 (pp 229-234)
- Process/microstructure studies of Mo(Si,Al)(2) and Nb(Si,Al)(2) intermetallics. PROCESSING AND FABRICATION OF ADVANCED MATERIALS IV (pp 129-137)
- Oxidation studies of Nb-17Al-xMo alloys. SYNTHESIS/PROCESSING OF LIGHTWEIGHT METALLIC MATERIALS II (pp 375-381)
- Recent advances in fiber coating technology for use in SiC/Ti-MMCs. SYNTHESIS/PROCESSING OF LIGHTWEIGHT METALLIC MATERIALS II (pp 225-232)
- Characterization of a Ti-48Al-2Nb-2Cr alloy synthesized from mixed gas atomized and mechanically alloyed powders. SYNTHESIS/PROCESSING OF LIGHTWEIGHT METALLIC MATERIALS II (pp 271-277)
- On the development of Nb-17Al-xMo alloys. SYNTHESIS/PROCESSING OF LIGHTWEIGHT METALLIC MATERIALS II (pp 355-362)
- Study of the microstructure and properties of spray formed Al-5Cr-1.5Zr. SYNTHESIS/PROCESSING OF LIGHTWEIGHT METALLIC MATERIALS II (pp 119-126)
- Microstructure studies on Fe-Al laminate materials. SYNTHESIS/PROCESSING OF LIGHTWEIGHT METALLIC MATERIALS II (pp 149-156)
- Effects of Al on omega formation in transition metal intermetallic alloys. STRUCTURAL INTERMETALLICS 1997 (pp 825-830)
- Oxidation studies on MoSi2-X (X=Al, Ta, W) alloys. STRUCTURAL INTERMETALLICS 1997 (pp 869-875)
- Influence of Zr addition on the microstructure and properties of PM Al-8Fe-4Ni alloy. SYNTHESIS/PROCESSING OF LIGHTWEIGHT METALLIC MATERIALS II (pp 111-118)
- Study of phase transformations in Ti-47Al-3V. GAMMA TITANIUM ALUMINIDES (pp 173-180)
- A COMPARISON OF SCS6 TI-6AL-4V AND SIGMA (SM1240) TI-6AL-4V COMPOSITE SYSTEMS - A REACTION KINETICS STUDY. RECENT ADVANCES IN TITANIUM METAL MATRIX COMPOSITES (pp 155-165)
- EFFECT OF PROCESSING ON THE FIBER SURFACE MORPHOLOGY. RECENT ADVANCES IN TITANIUM METAL MATRIX COMPOSITES (pp 75-85)
- EELS imaging studies of fibre-reinforced metal matrix composites. ELECTRON MICROSCOPY AND ANALYSIS 1995, Vol. 147 (pp 191-194)
- A COMPARISON OF SCS6 TI-6AL-4V AND SIGMA SM1240 TI-6AL-4V COMPOSITE SYSTEMS - A MICROSTRUCTURAL CHARACTERIZATION. RECENT ADVANCES IN TITANIUM METAL MATRIX COMPOSITES (pp 139-154)
- STUDY OF THE MICROSTRUCTURE AND OXIDATION OF NBSI2 BASE ALLOYS. HIGH-TEMPERATURE ORDERED INTERMETALLIC ALLOYS VI, PTS 1 AND 2, Vol. 364 (pp 1321-1326)
- METASTABLE PHASE TRANSFORMATIONS IN TI-40AL-10V ALLOY. HIGH-TEMPERATURE ORDERED INTERMETALLIC ALLOYS VI, PTS 1 AND 2, Vol. 364 (pp 187-192)
- THE MICROSTRUCTURE OF NB3AL-MO INTERMETALLICS. HIGH-TEMPERATURE ORDERED INTERMETALLIC ALLOYS VI, PTS 1 AND 2, Vol. 364 (pp 1353-1358)
- STUDY OF THE EFFECTS OF AL, TA, W ADDITIONS ON THE MICROSTRUCTURE AND PROPERTIES OF MOSI2 BASE ALLOYS. HIGH-TEMPERATURE ORDERED INTERMETALLIC ALLOYS VI, PTS 1 AND 2, Vol. 364 (pp 911-916)
- TEM INVESTIGATION OF RAPIDLY QUENCHED METASTABLE GAMMA-TIAL PHASES. JOURNAL DE PHYSIQUE IV, Vol. 3(C7) (pp 465-468)
- SOLIDIFICATION AND METASTABLE PHASE-FORMATION IN CONVENTIONAL AND PLANAR FLOW CAST TI-48.8AT-PERCENT-AL-2.2AT-PERCENT-V. JOURNAL DE PHYSIQUE IV, Vol. 3(C7) (pp 377-382)
- INTERFACE STUDIES IN A TI-6AL-4V-SIGMA FIBER-COMPOSITE. JOURNAL DE PHYSIQUE IV, Vol. 3(C7) (pp 1717-1722)
- THE MICROSTRUCTURE AND PROPERTIES OF THE PM AL-2.6LI-1.6HF ALLOY. ALUMINIUM-LITHIUM, VOLS 1 AND 2 (pp 507-512)
- MICROSTRUCTURAL MODELING FOR THE DEVELOPMENT OF LASER-TREATED, GAS-ATOMIZED AND SPRAY-FORMED MAGNESIUM ALLOYS. MAGNESIUM ALLOYS AND THEIR APPLICATIONS (pp 535-542)
- DESIGN OF MAGNESIUM ALLOYS WITH IMPROVED CORROSION PROPERTIES. MAGNESIUM ALLOYS AND THEIR APPLICATIONS (pp 119-126)
- EFFECT OF PROCESSING ON THE STRUCTURE OF THE SURFACES OF MG-AL ALLOYS. MAGNESIUM ALLOYS AND THEIR APPLICATIONS (pp 191-198)
- RAPID SOLIDIFICATION OF AL-CR-ZR-MN ALLOYS. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 134 (pp 1158-1161)
- THE MICROSTRUCTURE AND PROPERTIES OF RAPIDLY SOLIDIFIED AL-HF ALLOYS. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 134 (pp 1234-1237)
- THE STRUCTURE AND MORPHOLOGY OF THE CORROSION PRODUCTS FORMED ON THE SURFACES OF A RAPIDLY SOLIDIFIED MG-35 AL-ALLOY. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 134 (pp 1029-1032)
- THE MICROSTRUCTURE AND PROPERTIES OF HIGH-PRESSURE GAS-ATOMIZED AL-LI-HF ALLOY POWDERS. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 134 (pp 1144-1147)
- THE DISTRIBUTION OF HETEROGENEOUS NUCLEANTS IN AL-CR ALLOY POWDERS. MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, Vol. 133 (pp 767-770)
- Preparation and Melting of Zr-1.0Nb Alloy. Materials Science Forum, Vol. 869 (pp 578-584)
- Powder production, FAST processing and properties of a Nb-silicide based alloy for high temperature aerospace applications. Journal of Materials Research and Technology, 28, 3217-3224. View this article in WRRO
- Professional activities and memberships
-
- Member of the Refractory Metals and Materials Committee, TMS
- Member of EPSRC Materials College
- Adviser to overseas Academies of Science, Research Councils and Research Agencies on Materials R&D
- Adviser to International Metals/Materials Associations on Materials research, teaching and continuous professional development
- Adviser to overseas Universities on Engineering research and teaching
- Bodossaki Foundation Award, 1975
- Burton Medal and Prize, University of Sheffield, 1981
- Elegant Work Prize, IoM, 1995