Our Impact

Royce at the University of Sheffield provides societal, environmental, and economic benefit through innovation in advanced materials processing.

'FAST-Forge' process developed at Royce at the University of Sheffield could revolutionise production of titanium goods

FAST-Forge; The next generation of metal innovation

'FAST-Forge' process developed at Royce at the University of Sheffield coul

The City of Steel has brought forward a new metal revolution; Researchers at the University of Sheffield are paving the way for more sustainable titanium production

Using 3D Printing to help us see into space

Nanosatellites offer a way to greatly increase access to space-based imaging. Whether these telescopes are looking to space for astronomical measurements, or to earth to track climate and weather, the costs are fraction of the large-scale satellites.

Read in full

Artificial hip joint (titanium) made using FAST-Forge

A new solid state approach to produce titanium hip joints from powder

Near net shape component production that also uses waste additive manufacturing powder is of increasing interest in the field of implant manufacturing.

Read in full

Advanced Tribology and Wear Research at The University of Sheffield Using NanoMEGAS

The Sorby Centre for Electron Microscopy, School of Chemical Materials and Biological Engineering, The University of Sheffield

Read in full

Finding out about Additive Manufacturing

Integral to our role here at Royce at the University of Sheffield is outreach. This week we welcomed Lila on a work experience placement to the Royce Discovery Centre. She's been investigating a couple of facilities and this is what she's observed in the area of Additive Manufacturing with Dr. George Maddison.

Find out more

Electron micrograph and Energy Dispersive Spectroscopy elemental colour maps

Optimised Powder Encapsulation Practice

Assessing the impact of encapsulation conditions on the quality of powder metal shaped parts consolidated by Hot Isostatic Pressing

Find out more

Alice Pyne has pioneered high resolution AFM imaging of DNA at the sub-molecular scale. [Pyne]

Topo-Stats: Making AFM Data More Accessible

Dr. Alice Pyne, a leading Royce researcher recently recognised for her commitment to open science and open data, leads a team of collaborators at the University of Sheffield who have developed Topostats, a Python toolkit with an open licence.

Read in full here

Electron Probe Micro-Analysis (EPMA) unlocks a closer understanding of chemical distribution in engineering materials

Electron probe micro-analysis (EPMA) provides a significantly enhanced means to obtain precise and accurate quantitative elemental compositional analysis of complex materials systems at the micron scale.

Read in full here

Additive manufacturing magnetic materials for sensors/actuator applications

Producing sensors by manufacturing magnetostrictive materials using 3D printing technologies allows tuneable performance and design flexibility for many sectors including healthcare.

Read in full here

CoMaSS: Construction Materials from Sand and Sun

A proof of concept project shows the potential to 3D print construction materials from desert sand and using sunlight to help combat desert expansion.

Read in full here

Young's Modulus Measurement Techniques - Collaboration with Volkswagen Research

PhD researcher, Sully Khan, spent eight weeks at Volkswagen's research centre in Wolfsburg, Germany, with a view to obtaining accurate Young's modulus measurements for various samples.

Read in full here

2D Strain map with different IMCs cluster size

Microstructural Effect on the Formability of 6xxx Aluminium Alloys

Zhenjie Cao, PhD researcher at the Royce Hub at the University of Manchester has been investigating rolling, heat treatment and mechanical testing with 6xxx aluminium alloys.

Read in full here

Image from Dr B. A. Rickinson's HIP Case Study — X Ray image of Hot Isostatic Pressed Powder Prototype

Powder and Hot Isostatic Processing for designer metallic structures

The application of Hot Isostatic Pressing together with specialised encapsulation of metal powders to develop novel near net shapes offers increasing potential to arena of near net shape manufacturing.

Read in full here

Low-Cost Titanium Armour for Land Based Defence Platforms

Titanium alloys are high strength and low density, making them an ideal material for ballistic protection. Due to prohibitive costs of extraction and processing, their use in this sector has been restricted to weight-critical applications

Read in full here

Illustration of the cycle of green hydrogen production

Producing Porous Titanium Structures for Green Hydrogen Electrolysis

Titanium is considered the optimal material for Green Hydrogen electrolysers, but new FAST technology developed in Sheffield makes it financially viable.

Read in full here

Sam Lister stands next to an industrial hammer at W. H. Tildesley

Collaboration with W.H. Tildsley revolutionises sub-sea junction production

"We believe die life is extended from 200-300, up to 1000 parts conservatively [by the FAST-forge process], in other words, increases die life by at least 300%" - David Lunn, W.H. Tildesley, Wolverhampton

Read in full here

The Researcher Concordat and The University of Sheffield

Dr Alice Pyne, Future Leaders Fellow, Head of our Nano Characterisation Lab, and Senior Lecturer, shares what the Researcher Concordat means to them.

Elizabeth Davis-Fowell in front of Panalytical Empyrean

Investigating Rare-Earth Free Permanent Magnetic Materials for Applications in Electric Motors

Elizabeth Davis-Fowell, PhD Researcher based at The University of Sheffield, Partners with Volkswagen Materials Group to discover novel alternatives to existing magnetic alloys in use in the automotive sector.

Read in full here

Solid-State Processing of Surplus Aluminium Alloy Powders through a Combination of Field Assisted Sintering Technology and Hot Rolling

The Sheffield Titanium Alloy Research [STAR] group partners with ECKART GmbH to convert surplus aluminium alloy powders from atomisation into sheet material in two solid-state steps for use in aerospace applications.

Read in full here

Ella Hudson and image of hair strands under a microscope

Investigating the Nanomechanical Properties of the Surface Layers of Hair Fibres

Ella Hudson, PhD Researcher at The University of Sheffield, makes use of the Hysitron TI Premier Nanoindenter to ascertain the contribution of the hair cuticle to the mechanical properties of the whole fibre.

Read in full here

Photo of Lucy Farquhar and a sample from her research

Designing Additively Manufactured High Entropy Alloys to Increase Efficiency and Sustainability of Aerospace Components

Lucy Farquhar, PhD Researcher based at The University of Sheffield, Partners with Boeing UK to establish a novel additive manufacturing solution to develop high entropy alloys able to operate under high temperatures for jet engine applications.

Read in full here

Additive Manufacturing of Novel Shape Memory Alloys for Clean Energy Applications

Josiah Cherian Chekotu, PhD Researcher based at Dublin City University, aims to reduce carbon emissions within the cooling and refrigeration industry through additively manufactured novel shape memory alloys for green energy solutions.

Read in full here

Digital Twins for High-Value Components

Digital twin usage is growing apace. A group of researchers at the UK’s Advanced Forming Research Centre and The University of Sheffield explore its role in forging high-value components.

Read in full here

Investigating the behaviour of Ti-Fe binary alloys produced from elemental powders during the HIP'ing process

The project aims to gain fundamental understanding of consolidation for developing novel, low-cost, near-net-shape Titanium alloys, while avoiding the chemical segregation observed in the difficult to cast Ti alloys.

Read in full here

Contributing Towards Nuclear Waste Management

Radiological Hot Isostatic Pressing at The University of Sheffield: A case study by the NucleUS Immobilisation Science Laboratory into the Management of the UK Plutonium Inventory.

Read in full here

Quintus hot isostatic pressing facility - Nuclear AMRC

Building Confidence in Powder Metallurgy

Components made from austenitic stainless steel powder can meet the material requirements of the civil nuclear industry, Nuclear AMRC researchers have shown.

Read in full here

Material Scientists observing the FAST machine

Swarf Titanium to Engine Parts in 3 Steps

Lower-cost access to lightweight titanium alloys will be a game-changer for the automotive industry, enabling manufacturers to reduce the emissions their cars create, while keeping them affordable.

Read in full here

Group of images showing BiFeO3-SrTiO3 based multilater ceramic capacitors

Development of High Energy Density Multilayer Ceramic Capacitors

The Functional Materials and Devices Group aims to improve the operating voltage and energy storage density of high energy density capacitors.

Read in full here

An image of steel being melted and cast into a mould — Casting into a mould

The Influence of Nanoprecipitation on Microalloyed Steels for the Automotive Industry

Extensive research into the introduction of new high-strength steels, based on microalloyed concepts for automotive applications, aims to reduce weight and emissions from vehicles.

Read in full here

Investigating the Effect of Helium Fusion Plasmas on Tungsten-Tantalum Alloys

Researchers utilised the Royce Discovery Centre facilities, to produce tungsten-tantalum alloys in complete solid solution using a novel processing method.

Read in full here

A graphic of a microscope in a grey circle

Nuclear Waste Containers: Does the Surface Finish Matter?

3D Optical Profilometry has been utilised by the NucleUS team to evaluate the surface finish of stainless samples and determine roughness parameters to assess the suitability of materials for nuclear waste disposal.

Read in full here

Squid Enables Highly Accurate Study of Magnetic Materials

The high sensitivity of the equipment means that they allow for a much more accurate determination of magnetic properties on materials where the magnetism is extremely weak.

Read in full here

An image of measurements taken on the Empyrean showing red to blue patches illustrating charging and discharging cycles

Developing the Next Generation of Energy Storage Materials

Growing concerns surrounding lithium supplies and sustainability have increased interest in developing a lower-cost, more environmentally-sound battery material.

Read in full here

An image of two springs formed by continuous extrusion

Using 'Waste' Powders to Create Parts for Lightweight Vehicles

Researchers have discovered that through a method of continuous extrusion, rejected titanium powders can be used to create components for high-performance applications.

Read in full here

Trent XWB-97 flying test bed engine front bearing housing. Showing 3d printed core inlet vane assembly

3D Printing of Critical Aircraft Structures

Rolls-Royce have used additive layer manufacturing (ALM) to construct a titanium front bearing housing (FBH) which is held inside a Rolls-Royce Trent XWB-97 engine.

Read in full here

A set of five images showing microscope imaging of a variety of alloys

Alloy Development for Aerospace

Jet engine manufacturers continuously strive to improve efficiency and reduce emissions, however, such advances are often limited by the materials available.

Read in full here

A synthetic aorta in a metal box, with plastic tubes running in and out

Elastomeric Polymer Scaffolds for 3D Cell and Tissue Culture

Researchers at the University of Sheffield are developing a 3D cell culture platform with the potential to revolutionise laboratory research into tissue engineering.

Read in full here

A magnified image of a 3D printed polymer made using bacteria

Using Bacteria to Create Better Biomedical Materials

Researchers are using bacteria to create polymers that behave consistently and degrade safely, resulting in better patient outcomes.

Read in full here